EasyManua.ls Logo

Andersson PLS 2.1 - Troubleshooting Audio Issues; Resolving Sound Quality and Clipping Problems; Product Specifications; Technical Data and Included Accessories

Andersson PLS 2.1
19 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
English Svenska Norsk
8
Troubleshooting Specifications
Input signal is clipping: Try reducing the input gain/ the
volume control on your audio source device.
Output is clipping: Lower the main volume level.
Sound quality is poor: Lower the main volume level. The
sound is easily distorted at very high volume.
Too much/little bass: Try adjusting the tone/equalizer set-
tings on your audio source device to adjust the bass level.
Input Voltage: AC230V/50Hz DC12V/5A
RMS output power: 50W
Frequency response: 55Hz-20KHz
Impedance: 4 OHM
Speaker unit size: 8”Woofer+1”Horn tweeter
Time required to
fully charge: up to 8-10 hours
Playback time: up to 24 hours
Battery type: Lead-Acid rechargeable
battery, 12V/12AH
Product size: 585H x 315D x 350W mm (max)
Product net weight: 17kg
Bluetooth version: CSR v2.1+EDR - A2DP, AVRCP
BT working distance: up to 10m in open areas
Inputs: 2xRCA, SD slot, USB port
Included
User manual x1
Power cord x1

Related product manuals