ATTENTION!
In the event of an incorrect connection of the room controller or a short circuit in
the installation and actuators, irreparable damage to the room controller can occur.
Therefore, pay special attention during the installation and follow the instructions
carefully!
• Carefully read these instructions before starting the installation.
• Room controller Andivi must be installed according to applicable standards.
• Before any intervention, make sure the power is turned off.
CAREFUL!
Regular maintenance of convectors can avoid excessive burdens of the room
thermostat, which can lead to the destruction of it. When a building is under
construction, the bearings in the convectors can often get too dusty, which can lead
to excessively high starting current that can damage or destroy the room thermostat.
To Next Page
Loading...