e. After reading the result, press the exhaust valve which is located in the front of the
bulb to release the air.
f. When all the air is pushed out of the cuff, BPM will blink , then you can start
measuring again.
g. After measurement, the monitor will turn off automatically after 3 minutes of no
operation. Alternatively, you can press the “ON/OFF” button to turn off the monitor
manually.
h. During measurement, you can press the exhaust valve which is located in the
front of the bulb to release the air.
Note: Please consult a health care professional for interpretation of pressure measurements.
6. ASSESSING HIGH BLOOD PRESSURE FOR ADULTS
The following guidelines for assessing high blood pressure (without regard to age or gender)
have been established by the World Health Organization (WHO). Please note that other
factors (e.g. diabetes, obesity, smoking, etc.) need to be taken into consideration. Consult with
your physician for accurate assessment, and never change your treatment by yourself.
To Next Page
Loading...