Andrew James Bread Maker - Troubleshooting Guide; Common Problems and Solutions

27
Troubleshoong
No Problem Cause Soluon
1. Smoke is coming
from the
venlaon hole
when baking.
 Some ingredients may
have stuck to the
heang element. During
the rst use, oil may be
present on the surface
of the heang element.
 Unplug the bread maker
and clean the heang
element when it has
cooled.
 First me use, dry run
the operaon as
instructed.
2. Bread boom/
crust is too thick.
 Keep warm funcon has
been used for to long.
 The bread has been kept
in the bread pan for too
long a period resulng in
a loss of water.
 Take bread out earlier to
avoid this occurring.
3. It is very dicult
to take the bread
out.
 Kneader has stuck
ghtly to the sha in the
bread pan.
 Aer taking the bread
out, put hot water into
the bread pan and
immerge kneader for 10
minutes, then take it out
and clean.
4. Ingredients not
evenly srred and
don’t bake
properly.
 Selected programme
menu is incorrect.
 Aer operang, the
cover was opened
several mes and the
bread is dry.
 Select the correct
programme.
 Do not open the cover
whilst the bread rises.