What to do if the Andrew James Blender beeps continuously and the LED flashes?
If the buzzer beeps continuously and the LED flashes on your Andrew James Blender, it could be due to a loose or poorly assembled top lid. Reassemble the lid, ensuring the magnet is positioned at the side of the handle. Another cause could be insufficient water in the jar. Make sure to add water above the minimum mark.
What to do if the Andrew James Soup Maker & Blender food has burned?
If the food has burned while using your Andrew James Blender, it may be because the food used is too sweet or contains too much starch. Watch the cooking process very carefully and, if possible, use less sweet food or food with fewer starch ingredients. Alternatively, if you warmed a soup without rinsing the jar beforehand, some food might be stuck at the bottom. Empty and rinse the jar to remove any deposits, then refill it.
What to do if the Andrew James Soup Maker & spills over?
If your Andrew James Blender experiences spill-overs, it could be because you exceeded the maximum level for liquids in the jar. Always consider the max level. It might also be caused by using food high in starch that boils quickly. In this case, put less water or stock in the food.
Why Andrew James Soup Maker & Blender does not start?
If your Andrew James Blender isn't starting, the jar might not be correctly fixed to the main unit. Assemble the jar to the base properly, pushing down a little until you hear a beep sound.
What to do if the Andrew James Blender beeps continuously and the LED flashes because of food?
If the buzzer on your Andrew James Blender beeps continuously and the LED flashes, and it's because food is touching the overflow sensor before you start, clean the overflow sensor completely.
What to do if the Andrew James Soup Maker & food is not cooked?
If the food is not cooked properly in your Andrew James Blender, it might be because you have put too much food in the jar. Start the cooking process again. Also, some types of food take longer to cook than others, so start the cooking process again.
What to do if the Andrew James Soup Maker & food is not well mixed?
If the food is not well mixed in your Andrew James Blender, you might not have chosen the correct function. Try another function. Another reason could be that you did not add enough water. Add some water or stock.
What to do if Andrew James Soup Maker & beeps continuously and LED flashes due to overheating?
If your Andrew James Blender's buzzer beeps continuously and the LED flashes (other than issues 1 and 2), it could be due to incorrect or extended use that caused the appliance to overheat. Unplug the appliance, take off the jar, and let it cool down for 10 minutes.
Crucial safety precautions and warnings for using the appliance.
How to use the Soup Chunky function to make soups with diced vegetables.
Step-by-step process for making soup with the appliance.
Detailed steps for cleaning the soup maker and its components.
Details on correct plug wiring, fuse replacement, and safety.
General| Brand | Andrew James |
|---|---|
| Model | Soup Maker & Blender |
| Category | Blender |
| Language | English |
To Next Page
