&Tradition Colette ATD6 - Assembly Steps; Step 1: Wear Gloves; Step 2: Align Shade and Base; Step 3: Secure Shade

Step 1 / 4
Put on the gloves provided before assembling the lamp.
Step 2 / 4
Place the shade on top of the base and align the holes.
Step 3 / 4
Once you have aligned the holes of the shade and the base,
insert the screws and tighten them by hand.
Step 4 / 4
Install the lightbulb.
Please follow steps 1 to 4 to assemble the product.