&Tradition FORMAKAMI JH18 User Manual

Congratulations with your new Formakami lamp, designed in 2018
by Jaime Hayon. We hope you will enjoy using this product and follow
these instructions to ensure correct installation. If you have any questions
or comments, please do not hesitate to contact us by mail on:
info@andtradition.com
CONTENTS
A - Paper shade
B - Lamp base with 2 meter cable and dimmer
C - 2x Screws
Please read these instructions carefully and retain them for future reference to ensure that
the product is correctly installed should it be moved or sold. For your own safety, please
study each step of this instruction manual before you commence installation. &tradition
are not responsible for any faults or damages caused by not following these instructions
correctly. Do not modify this product in any way.
TOOLS NEEDED
- Bulb type E27 (x2)
SAFETY PRECAUTIONS
- Dispose of plastic bag from packaging and do not allow children to play with it.
- Keep product well out of children’s reach.
- The product is only intended for interior use.
- Do not attempt installation of product if you are not competent to do so yourself.
- Consult a professionally qualied electrician if in any doubt.
- Disconnect the electricity supply at the fuse box, before commencing work.
CLEANING INSTRUCTIONS
- Wipe surface of lamp shade with a soft duster, or very gently with a soft dry cloth.
- Do not use any abrasive cleaning tools such as steel wool, scouring sponges or
stiff brushes.
- Never use liquids to clean the shade.
Maximum 60 W. E27 bulb.
Not included
B
C
A
FORMAKAMI
JH18
BY
JAIME HAYON
2018
USER INSTRUCTIONS
ANDTRADITION.COM

&Tradition FORMAKAMI JH18 Specifications

General

Brand	&Tradition
Model	FORMAKAMI JH18
Category	Home Lighting
Language	English

Summary

Tools and Safety

Required Tools

Specifies the required bulb type for the lamp. Use two E27 bulbs.

Safety Precautions

Includes warnings about plastic bags, child safety, interior use, competent installation, and electrical safety.

Cleaning Instructions

Instructions for cleaning the paper shade using soft materials only, avoiding liquids and abrasives.

Installation Steps

Step 1: Attach Shade to Base

Carefully lower the lamp shade onto the lamp base.

Step 2: Secure Shade

Align and insert screws to connect the paper shade's wire frame to the wooden base.

Step 3: Install Bulbs

Install the light bulbs into the lamp base.

Step 4: Position Shade

Carefully pull the paper shade up over the lamp base.

Step 5: Connect Shade Top

Connect the top of the paper shade with the wire frame of the lamp base.

Step 6: Final Check

The lamp is ready for use; light intensity is adjustable via the cable dimmer.