Please follow steps 1 to 4 to
assemble the product.
Step 2 / 3
Once the light bulb is installed,
rotate the shade by using the
flexible joint to achieve the
desired angle. Caution: we
recommend setting the angle
before turning on the lamp as
the shade will become hot to
the touch once the lamp is in
use for longer periods of time.
Step 3 / 3
Insert the plug into a wall
socket and use the switch
located on the lamp’s cord
to turn on and o.
Step 1 / 3
The lamp is delivered fully
assembled. Install the light bulb
in the socket.
To Next Page