4
1 Fit the detachable shaft onto the power unit
.
2 Then fit the bowl. Place the handle towards the back and turn clockwise until it
locks
.
3 Fit an attachment over the drive shaft.
●Always fit the bowl and attachment onto the machine before adding ingredients.
4 Fit the lid
ensuring the top of the drive shaft locates into the centre of the lid.
●Do not use the lid to operate the processor, always use the on/off control.
5 Switch on and select a speed.
●The processor won=t work if the bowl and lid are fitted incorrectly.
●Use the pulse(p) for short bursts. The pulse will operate as long as the control is
held in position.
6 Reverse the above procedure to remove the lid, attachments and bowl.
●Always switch off before removing the lid.
Important
●Your processor is not suitable for crushing or grinding coffee beans, or converting
granulated sugar to caster sugar.
●when adding almond essence or flavouring to mixtures avoid contact with the
plastic as this may result in permanent marking.
To use your liquidiser
1
Fit the sealing ring into the blade unit ensuring the seal is located correctly.
Leaking will occur if the seal is damaged or not fitted correctly.
2 Screw the jug onto the blade unit.
3 Put your ingredients into the jug.
4 Put the blending cap in the lid, then turn.
5 Turn the lid in a clockwise direction to lock onto the jug.
6 Place the liquidiser onto the power unit and turn to lock
.
7 Select a speed or use the pulse control.
●Allow all llquids to cool to room temperature before placing them in the liquidiser.
Hints
●When making mayonnaise, put all the ingredients, except the oil into the
liquidiser. Then with the machine running, pour the oil into the cap and let it run
through.
●Thick mixtures,eg pates and dips, may need scraping down. If it’s difficult to
process, add more liquid.
●When crushing ice use the pulse in short bursts.
●To ensure the long life of your liquidiser, never run it for longer than 60 seconds.
Switch off as soon as you’ve got the right consistency.
●Don’t process spices - they may damage the plastic.
●The machine won’t work if the liquidiser is fitted incorrectly.
●Don’t put dry ingredients into the liquidiser before switching on. If necessary,
cut them into pieces; remove the filler cap; then with the machine running, drop
them through one by one.
●Don’t use the liquidiser as a storage container. Keep it empty before and after use.
●Never blend more than 1
1
/
2
litres (2pts 12floz) - less for frothy liquids like milkshakes.
Using the attachments
To Next Page
Loading...