6
● Handle the cutting discs with care - they are extremely sharp.
To use the cutting discs
1) Fit the drive shaft and bowl onto the power unit.
2) Holding by the centre grip
, place the disc onto the
drive shaft with the appropriate side uppermost
.
3) Fit the lid.
4) Choose which size feed tube you want to use. The
pusher contains a smaller feed tube for processing
individual items or thin ingredients.To use the small
feed tube - first put the large pusher inside the feed
tube.To use the large feed tube - use both pushers
together.
5) Put the food in the feed tube.
6) Switch on and push down evenly with the pusher-
never put your fingers in the feed Tube.
Hints
●Use fresh ingredients.
●Don’t cut food too small. Fill the width of the large feed tube fairly full. This
prevents the food from slipping sideways during processing. Alternatively
use the small feed tube.
●When using the chipper disc, place ingredients horizontally.
●When slicing or shredding : food placed upright comes out shorter than
food placed horizontally
.
●There will always be a small amount of waste on the plate or in the bowl
after processing.
Citrus press
Use the citrus press to squeeze the juice from citrus
To Next Page
Loading...