EasyManua.ls Logo

AneX cross - CHILD SAFETY SEAT; CHILD SAFETY SEAT ATTACHMENT; MAINTENANCE AND CLEANING; MAINTENANCE AND CLEANING GUIDELINES

AneX cross
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
20
child with safety belts, insert the belt locks into the
holder and tighten those belts (fig.32). To unfasten
the belts, press the button and remove the locks out
of the holder (fig. 32).
CHILD SAFETY SEAT
The child safety seat can be mounted on the stroller’s
frame as well. It must be attached to specially made
adapters (fig. 33). To secure the removable child
safety seat, insert the adapters into the adapter
pockets on the frame (fig. 33), then secure it (fig. 34).
The adapters are blocked automatically. To remove
adapters press the button on the inner side (fig. 35).
The child safety seat equipped with a feet cover
fastened with buttons to the body of a child safety
seat (fig. 34); it has child safety belts as well. To
remove child safety seat from a frame press buttons
on both sides of a seat simultaneously (fig. 36). Our
safety seats can be mounted in a car both with a
standard car seat belts or ISOFIX locking system.
MAINTENANCE AND CLEANING
Make sure this stroller always stays dry and clean
(both its upholstery and its frame). There’s no need to
remove the stroller’s upholstery. This stroller’s
upholstery can be cleaned with a damp sponge or a
cloth using a detergent. It is necessary to control the
degree of wear of the wheels and clean them from the
dust and the sand. When lubricating the wheel axle
drop a few drops of oil between the axle and the hub.
If the stroller gets wet, it should be dried and its metal
parts should be wiped with the dry cloth. The colors
of this stroller materials and fabrics can undergo
changes as a result of prolonged exposure to sunlight.
TERMS OF WARRANTY
The warranty offered for this product shall be
annulled if the product is using improperly, that is
in breach of this manual rules.
Letter of guarantee is invalid without the date
of sale and a shop stamp.
Anex Co. provides warranty for the perambulator
you purchased for the period of 12 months from
the date of purchase, provided that it isn’t used for
unintended purposes.
All the complaints about defects must be submitted
to a vendor that sold you this product.
The warranty repair is carried out by the
manufacturer or a service center, reported by the
seller.
All the physical defects of this stroller, which
appeared during the warranty period, will be
repaired for free within 21 days starting from
the day when the stroller is delivered to a
repair workshop.
The warranty period is respectively extended
for the period of repair.
All the repair procedures related to this
stroller are set by a company that provides
warranty.
A malfunctioning product must be cleaned
before packaging for delivery to a repair
workshop.
If a letter of guarantee is lost, no duplicate will be
provided.
The warranty is valid only in the countries with
official representatives of ANEX TM.
WARRANTY IS NOT PROVIDED
For damages resulting from improper product use
and maintenance.
For repair carried out by unauthorized persons.
Natural wear during operation, e.g.: wheels.
For damages and ruptures caused by the buyer.
For fabric discoloration caused by prolonged
exposure to sunlight.
In accordance with new EU standards: a stroller
(ground transport vehicle) is not subject to return.
The company reserves the right to introduce design
changes the product’s performance without prior
notice for improving.
WARRANTY
EN
English

Other manuals for AneX cross

Related product manuals