ANFIM Caimano On-Demand Display User Manual

Pagina 1
Operating Manual
Grinder: S pecial P erformance-II / C aimano O n- D emand D isplay
S uper C aimano O n- D emand D isplay-II
(CODY / SCODY / SCODY-II / SP-II)
SUMMARY:
1. GENERAL DATA ……….…………………………………………………………………………….….……1-2
1.1. Electronic board
1.2. Electronic keyboard
2. WARNING - INSTALLATION INSTRUCTIONS AND USER RESTRICTIONS ………………….....2-3
2.1. Warning
2.2. Installing instructions and user limits
3. OPERATING……………………………………………………………………………………….…….…...….4-6
3.1. Condition turned-off
3.2. Condition turned-on
3.3. User mode and explanation “Time Lag”
3.4. Dosing (Time Lag Inactive)
3.5. Dosing (Time Lag Active)
4. PROGRAMMING MODE ……………………………………………………………………………….….…..7
4.1. How to access set-up mode for dosing
4.2. Adjust dosing time
5. READING AND RESET SHOT COUNTER ……………………………… …………………..…...……..8-9
5.1. Verify shot counter for single & double shots
5.2. Reset shot counter for single & double shots
6. PROGRAMMING MODE – MENU FOR SERVICE TECHS ……..………………………..…..….9-10
6.1. Adjust illumination LCD
6.2. Setting language
6.3. Setting counter for life cycle of grinding discs
6.4. Setting time lag- or single touch mode
7. SPECIAL FEATURES ………………..…………………………………………..……….…………......………11
7.1. Warning message for replacement of grinding discs
7.2. Resetting warning message
8. DEFAULT PARAMETERS …………………………………….………………...………….…….….…12
8.1. Default settings from manufacturer
8.2. Indication life time grinding discs

ANFIM Caimano On-Demand Display Specifications

General

Brand	ANFIM
Model	Caimano On-Demand Display
Category	Coffee Grinder
Language	English

Summary

General Characteristics

Electronic Board Details

Describes the managed electronic board with microprocessor, inputs, outputs, memory, and operating parameters.

Warning, Installation Instructions, and User Restrictions

Safety Warnings

Crucial safety warnings for power-on, protection, external components, and software modifications.

Installation Instructions and Usage Limits

Guidelines for wiring, ambient conditions, dirt protection, and using remote-control switches and suppressors.

Operating the Grinder

Device Status: Turned Off

Explanation of the device's state when not powered on and the procedure to turn it on.

Device Status: Turned On (Stand-by)

Description of the stand-by mode, LED indicators, and initial display status after powering on.

Explanation of 'Time Lag' Feature

Details the 'Time Lag' feature, its activation, adjustment, and operational modes for porta-filter use.

Grinding (Time Lag Inactive)

Instructions for initiating grinding for one or two cups when the 'Time Lag' feature is inactive.

Grinding (Time Lag Active)

Procedure for grinding with the 'Time Lag' feature active, including porta-filter interaction and interruptions.

Programming Mode

Setting Grinding Time for 1 & 2 Cups

Guide to enter programming mode and set grinding times for single and double doses.

Programming Doses

Instructions for adjusting grinding time in seconds and tenths of seconds using specific keys.

Reading and Resetting Counters

Reading Partial Counters

Steps to access and view the partial counters for single and double dose dispensing.

Resetting Partial Counters

Procedure to reset the partial counters for doses using specific button combinations.

Technical Programming Menu

Adjusting LCD Contrast

Method to access the technical menu and adjust the contrast of the display.

Setting Language

Instructions on selecting and setting the display language from available options.

Setting Grinder Blade Counter

Information on setting the numerical counter for grinder blade replacement cycles.

Enabling Time Lag or Single Touch Operation

Configures 'Time Lag' or 'Single Touch' operation modes for grinding, affecting porta-filter interaction.

Special Features

Maximum Doses Setting

Setting and resetting the maximum number of doses before the grinder blocks.

Limit Maximum Doses

Setting the maximum dose limit that halts the grinder upon reaching.

Default Settings Configuration

Option to select default settings for CAIMANO or SUPER CAIMANO models.

Password Setting

Procedure to set or change the access password for special features.

Hardware Test Procedure

Details the hardware test sequence for components like buttons, LEDs, and motor.

Exit and Save Settings

Function to exit the special features menu and save any changes made.

Grinder Blade Replacement Notice

Notice for Blade Replacement

Displays a warning message for grinder blade replacement based on the millstones counter.

Clearing Blade Replacement Warning

Procedure to reset the warning message for grinder blade replacement.

Default Parameters

Factory Default Delivery Times

Lists factory default dosing times for single and double cups for different models.

Notice Period for Blade Replacement

Specifies the programmed counter values for grinder blade replacement notices.