Angelantoni CH340 C - User Manual

Angelantoni Industrie s.p.a.
06056 Massa Martana (Pg) Italy
Tel. (++39) 075
.
8955.1 (a.r.)
Fax (++39) 075
.
8955200
Internet:www.angelantoni.it
E-Mail:info@angelantoni.it
Installation, use and maintenance handbook
512974
ecology project
CH0305-F03
Rel. 221200
CHALLENGE
CHALLENGE - E
CHALLENGE - ES
THERMOSTATIC AND CLIMATIC CHAMBERS
SERIES

Summary

2 WARNINGS

2.1 General Warnings

Provides overall safety precautions for machine operation.

2.2 Transport and Handling Safety

2.3 Installation Safety

2.4 Personnel Safety

Specifies safety requirements for personnel operating the machine.

2.5 Maintenance Safety

Lists safety guidelines to follow during maintenance.

3 TECHNICAL SPECIFICATIONS

3.1 Climatic Chamber Specifications

Lists technical data for climatic chamber models.

3.2 Thermostatic Chamber Specifications

5 DESCRIPTION OF THE SYSTEM

5.1 General System Overview

5.2 Control System Architecture

Details the structure and function of the control system.

5.3 Cooling System Operation

5.4 Dehumidification System Function

5.5 Humidification System Function

6 INSTALLATION

6.1 Positioning and Site Requirements

6.2 Plumbing and Connections

6.3 Electrical Wiring and Connections

Detailed electrical installation and interface ports.

7 USE FORESEEN BY THE MANUFACTURER

7.1 Machine Purpose and Intended Use

7.3 Operator Responsibilities

7.4 Operational Use Limits

Details machine operating limits and prohibited materials.

7.6 Hazardous Areas and Waste Risks

Identifies potential hazards and waste disposal considerations.

8 START-UP

8.1 Compressor Oil Heating Procedure

Steps for heating compressor oil before operation.

8.2 Alarm Set-up and Configuration

Details how to set and configure temperature alarms.

8.3 Operational Checks

9 USE

9.1 Loading Test Products

9.2 Setting Up a Temperature Cycle

Guides on programming and executing temperature cycles.

9.4 Shutdown Procedures

9.5 Emergency Shutdown

Procedures for immediate action in emergency situations.

9.6 Restarting After Emergency Shutdown

10 SAFETY DEVICES - CHECK AND SET-UP

Thermostat Checks and Configuration

Verifying and setting software and hardware thermostats.

12 TROUBLESHOOTING

Machine Start-up and Setpoint Issues

Addresses problems with starting the machine and reaching set temperatures/humidity.

Cooling, Humidity, and Compressor Problems

Troubleshooting issues related to the cooling system, humidity control, and compressor.

Angelantoni CH340 C Specifications

General

Brand	Angelantoni
Model	CH340 C
Category	Climate chamber
Language	English