To Next PageTo Next Page
Need help?Do you have a question about the AngelTrax VULCAN Series and is the answer not in the manual?
Company address and contact details.
Contact phone number.
Contact fax number.
Company website address.
Information subject to change; updates available online.
Manual content may not be copied without written consent.
Configure vehicle identification details in the settings.
Set the correct time zone for the MDVR.
Configure the date and time settings for the device.
Adjust camera resolution settings for optimal clarity.
Safety compliance with electrical laws and transport precautions.
Steps for installation and need for qualified personnel.
Optimal conditions, accessory usage, and storage media guidelines.
General introduction, storage capabilities, and camera types.
Settings for post-ignition recording and driver behavior monitoring.
Details on physical components and software functionalities.
Detailed specifications for the 7-channel MDVR.
Dimensions, A/V ports, USB, and interfaces.
Camera compatibility, Wi-Fi, and device management features.
Image resolution, frame rate, and compression formats.
Features for detecting driver actions and panic button.
Different modes for recording video.
Voltage, temperature, and humidity requirements.
Configurable delay for system shutdown after ignition off.
Input range, output current, and low voltage protection.
AI features for driver assistance, status monitoring, and recognition.
List of included accessories.
List of optional accessories.
Methods for local device management.
User interface for logging into the system.
User name selection and login defaults.
Password entry and re-entry rules.
Language selection option.
Access to telephone functions.
Access to SMS functions.
Displays software/hardware version and serial numbers.
Status of communication and GPS modules.
Device connection and network status.
Instructions for searching recorded video.
Information related to device registration, vehicle, and driver.
General date, time, zone, and time synchronization settings.
Settings for device power on/off modes.
Configuration of user accounts and idle time.
Automatic IP acquisition and static IP configuration.
Setting the web port and Wi-Fi parameters.
Module selection, server type, and network type options.
APN, user name, password, and certification settings.
Center server setup, enable, and protocol type.
Network connection options and server IP address.
FTP configuration, server address, port, and credentials.
Automatic reconnection for downloads.
Live camera preview and audio options.
Adjusting camera view flipping.
Adjusting preview screen margins.
Settings for overwriting old data.
Channel configuration, naming, enabling, and resolution.
Selecting recording frame rate, quality, and mode.
Audio, I Frame, Encode Mode, and Alarm Quality settings.
Selecting storage and different record modes.
Channel identification and enabling IP camera.
IP/Port details, setup, and network camera search.
Changing the channel's IPC link.
PTZ operations, protocol selection, and test functions.
Channel indication and enabling PTZ camera control.
Settings for collecting data with sensors.
Editing sensor numbers and names.
Embedding sensor names in video image.
Applying configuration to other sensors.
Serial port selections and baud rate settings.
Selecting speed unit and source.
Setting time intervals and adding snap periods.
Alarm and manual snap configuration.
Base, speed, and linkage settings for alarms.
Name, enable, type, trigger, and linkage for panel alarms.
Trigger time and overlap duration for alarms.
Sensor name, enable, type, trigger, and linkage.
Video alarm name, enable, type, trigger, linkage, and loss settings.
Selecting motion detection alarm type.
Alarm channel, post recording time, and file locking.
Displaying screen on full screen during alarm.
ACC alarm setup, type, trigger, linkage, and calibration.
Geofencing capabilities and line I/O alarm switch options.
Managing config files, exporting data, and software upgrades.
Storage capacity status and recognition/formatting.
Resetting to factory defaults and rebooting the device.
Initial setup, testing procedures, and MotoTrax connection.
Troubleshooting system start, MDVR restarts, and recording failures.
Troubleshooting missing audio, GPS, and shutdown problems.
VX7AI IP rating, antenna installation, and default credentials.
Firmware update procedure and voltage protection reasons.
General