To Next PageTo Next PageWhat to do if Anjou AJ-ADA007 unit stops misting and the light flashes red due to over-temperature?
If your Anjou Accessories unit stops misting and the light flashes red, it indicates an over-temperature alarm. Turn off the unit. Ensure the unit is placed in a well-ventilated area to cool down, paying attention to the environmental temperature. Also, avoid adding warm water into the tank.
What to do if Anjou AJ-ADA007 Accessories pairing failed and the light stays solid red for 5 seconds?
If pairing fails on your Anjou Accessories and the light stays solid red for 5 seconds, it could be due to a poor network signal. Try placing the unit closer to the router to improve the connection.
What to do if the rubber parts malfunction on Anjou AJ-ADA007 after power failure, leading to water overfilling?
If, after several abrupt power failures, the rubber parts on your Anjou Accessories malfunction, leading to water overfilling, remove the water tank and wait for the rubber parts to drop back into place.
This product is a household electrical appliance, not for room lighting, and can be used by children with supervision.
Keep essential oils out of reach of children and pets. Supervise children during cleaning or maintenance.
Use only for aroma diffusion. Use only the included adapter. Do not insert foreign objects.
Ensure cord is intact, not damaged, bent, or pinched. Avoid wet hands when handling adapter.
Do not submerge, splash water, or store in humid locations. Do not block mist outlet.
Do not tilt during operation. Hold by lower section when moving. Do not touch atomizer immediately after use.
Avoid direct mist contact, direct sunlight, heat, wind, electronics, soft surfaces, or unstable surfaces.
Dispose of water after use, clean regularly. Do not modify or repair unit yourself.
Details the model number, power supply, and power consumption of the diffuser.
Covers working time, mist output, water tank capacity, atomization frequency, Wi-Fi, and noise level.
Unpack, check accessories, and verify installation of key components like mist tube and outlet valve.
Connect power, install essential oil bottle, add water to tank, and place tank on base.
Instructions for replacing the essential oil bottle stopper, including a note on oil compatibility.
Adjust mist output between high and low modes, and turn the unit off.
Set the diffuser to operate for 2, 4, or 8 hours, or turn off the timer.
Select strong or light aroma modes, with a note on output delay.
Cycle through colors, select a static color, or turn off the light.
Download the Anjou Diffuser app, create an account, and initiate Wi-Fi pairing.
Enter Wi-Fi pairing mode, select 2.4GHz network, and enter password for connection.
Successful pairing shows a solid green light; the device is then directed to management.
Access device control by clicking the device name; Timer/Aroma buttons are inactive if mist is off.
Enter Device Management to edit device name, light name, update, and location.
Add and manage device locations within the app for better organization.
Procedure for deleting a device from the app and its associated locations.
Check for and install the latest firmware version for the diffuser.
Steps to update firmware if a new version is available, including retry guidance.
Instructions for linking the Anjou Diffuser account to Amazon Alexa for voice commands.
Instructions for linking the Anjou Diffuser account to Google Home for voice commands.
Steps for routine cleaning using baking soda or detergent to remove residues and odors.
Monthly deep cleaning method using baking soda or lemon to remove scale and grime.
Avoid rinsing the base with water and do not use white vinegar on the atomizer.
Solution for low mist output is to clean the atomizer regularly.
Unit stops misting with red light; ensure proper ventilation and avoid warm water.
If pairing fails, check network signal and place the unit closer to the router.
After power failures, check rubber parts for proper placement to prevent overfilling.
Address issues like low mist, water outlet leakage, and damp desks.
Equipment tested and found compliant with FCC Part 15 limits for digital devices.
Statement on FCC and IC radiation exposure limits and minimum separation distance.
Device complies with Industry Canada license-exempt RSS standards for operation.
General| Model | AJ-ADA007 |
|---|---|
| Brand | Anjou |
| Battery Life | Unknown |
| Charging Time | Unknown |
| Water Resistance | Unknown |
| Number of Slots | Not Applicable |
