0201
LED Indicators Status
Light up one by one quickly,
then stay solid white
Connected to power
Solid white (100% brightness) Charging your device
Solid white (50% brightness) Standby mode
Flash white Metal objects detected
Only Led lights on the two sides flash
white
• •
Overvoltage or undervoltage
protection
• •
Incompatible power adapter
connected, indicating that you need
to switch to a Quick Charge 2.0/3.0
or Power Delivery car adapter
T
• •
This wireless charger is not compatible with non-MagSafe phone
cases, such as Otterbox Defender cases.
• •
Connect the Charging Mount to a Quick Charge 2.0/3.0 or Power
Delivery car adapter. Do not connect to a 5V/1A car charger or a
USB-A port on a car as it may affect the wireless charging function.
• •
Do not place any foreign objects between your device and the wireless
charging pad’s surface, including metal pads, magnetic cards, door
keys, coins, NFC cards, or other metal objects, as they could potentially
demagnetize the wireless charging pad, affect the charging speed, or
cause overheating.
• •
Wireless charging products make charging more convenient than wired
chargers, but confined by current wireless technology, their charging
speed is slower than that of wired chargers.
• •
High temperatures will reduce charging speed and restrict power. It
is recommended that you charge your device in environments with
temperatures below 40°C / 104°F.
• •
Do not operate the charger with damaged cord or cigarette lighter
connector—replace it immediately.
Important Safety Instructions
Please refer to the electrical and safety information on the bottom
before installing or operating the product.
• •
Avoid dropping.
• •
Do not disassemble.
• •
Do not expose to liquids.
• •
This product is suitable for moderate climates only.
• •
The maximum ambient temperature during use of this product must not exceed 40°C.
• •
Open flame sources, such as candles, must not be placed on this product.
• •
Only use a dry cloth or brush to clean this product.
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures: (1) Reorient or relocate the
receiving antenna. (2) Increase the separation between the equipment and receiver.
(3) Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected. (4) Consult the dealer or an experienced radio / TV
technician for help.
Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with a
minimum distance of 20 cm between the radiator & your body.
Product Name: Anker 613 Magnetic Wireless Charger (MagGo)
Model: A2930
The following importer is the responsible party (for FCC matters only).
Company Name: Fantasia Trading LLC
Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764
Telephone: +1 800 988 7973
To Next Page
Loading...
