EasyManua.ls Logo

Anker Nebula Astro - Safety Instructions; Setup and Usage Precautions; Power Supply and Charging

Anker Nebula Astro
192 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
EN
02
Safety Instructions
Read all instructions before you use this device. Do not make any changes or create
settings that are not described in this manual. If physical injury, loss of data, or
damage is caused by failure to follow instructions, the warranty does not apply.
Setup
To reduce the risk of re and/or electric shock, do not expose the device to rain or
moisture. Objects lled with liquids, such as vases, should not be placed on this device.
Do not place this device on soft surfaces such as tablecloths or carpets, otherwise
the device could be a re hazard.
Do not place this device in areas susceptible to excessive dust and dirt or near any
appliance generating a strong magnetic eld.
To prevent overheating, do not block or clog the ventilation openings.
Never place this device in a conned space. Always leave enough space around
this device for ventilation.
Avoid overexposing this device to direct sunlight, heat, large temperature
fluctuations, and moisture. Avoid extreme temperatures. The suitable operation
and storage temperature for this device and its accessories is 41°F to 95°F / 5°C to
35°C.
When this device is running for a long period of time, the surface may become hot.
If this occurs, shut it down immediately and unplug the charger. Resume operation
after the device has cooled down.
Always handle this device with care. Avoid touching the lens.
Do not allow children to handle the device without supervision.
Do not place heavy or sharp objects on this device.
To avoid electric shock, do not disassemble the device.
Only use attachments or accessories specied by the manufacturer.
Avoid extreme vibrations as they may damage the internal components.
Power Supply
Use only the provided power adapter.
Power off the device before removing the power supply from the socket.
Protect the power cord from being walked on or pinched, particularly at plugs,
convenience receptacles, and the point where they exit from this device.
Unplug this device if there are lightning storms or when unused for a long period of
time.
Where the power plug or an appliance coupler is used as the disconnect device, the
disconnect device shall remain readily operable.

Table of Contents

Related product manuals