Anker SoundCore Trance - Connectors (A3392); Connectors (A3393); Charging; Charging your Soundcore Speaker

Connectors (A3392)
DC IN
Connect to the provided power adaptor.
USB
Connect to a USB storage device.
Charge a USB device.
AUX
Connect to an external audio device through a 3.5mm aux cable (not provided).
Guitar / Mic port
Connect to a guitar / microphone (not provided).
Guitar / Mic volume knob
Rotate to adjust guitar / microphone volume.
Connectors (A3393)
DC IN
Connect to the provided power adaptor.
USB
Connect to a USB storage device.
Charge a USB device.
AUX
Connect to an external audio device through a 3.5mm aux cable (not provided).
Charging
Charging your Soundcore Speaker
Fully charge this speaker when using for the first time, which prolongs the lifespan of the built-in