Anker Soundsync A3341 - Connecting to Two Bluetooth Devices

07
EN
How to connect your Soundsync to two Bluetooth headphones /
speakers at same time:
You can play music on both headphones / speakers at same
time. This function is only available in TX mode.
1. Connect your Soundsync to the first Bluetooth headphone / speaker.
Press the multi-function button on your Soundsync and hold for 2 seconds
to enter Bluetooth pairing mode (or double click multi-function button to
activate Bluetooth pairing mode).
2. Place your Soundsync next to the first headphone / speaker and wait
30 secs for connection. Once Soundsync is successfully connected to
the first headphone / speaker, turn o both your Soundsync and the first
headphone / speaker.
3. Turn on the Bluetooth of the second headphone / speaker. Press the
multi-function button on your Soundsync and hold for 2 seconds to enter
Bluetooth pairing mode (or double click multi-function button to activate
Bluetooth pairing mode).