AnkerMake M5C User Manual

115V
M4×6 4pcs
M5×20 8pcs
ASSEMBLY GUIDE
AnkerMake M5C 3D Printer
Gantry Frame
Marco de grúa
Cadre de portique
Filament Holder
Soporte de lamento
Porte-lament
Model
：
V8110
Power Socket / Power Switch
Enchufe de corriente /
Interruptor de encendido
Prise électrique /
Interrupteur d'alimentation
Ventilation Holes
Agujeros de ventilación
Trous de ventilation
Extrusion Clip
Clip de extrusión
Clip d'extrusion
PTFE Feeding Tube
Tubo de alimentación de PTFE
Tube d'alimentation en PTFE
Extruder
Extrusor
Extrudeur
Wi-Fi/Bluetooth Indicator
Indicador de Wi-Fi/Bluetooth
Indicateur Wi-Fi/Bluetooth
LED Indicator
Indicador LED
Indicateur LED
Filament Slot
Ranura del lamento
Emplacement de
lament
Nozzle
Boquilla
Buse
PEI Plate
Placa PEI
Plaque PEI
Operation Button
Botón de operación
Opération Bouton
USB-C Port / Reset Slot
Puerto USB-C / Ranura
de reinicio
Port USB-C / Fente de
réinitialisation
Platform
Plataforma
Plateforme
①
②
③
④ ⑤ ⑥
⑦ ⑧ ⑨

AnkerMake M5C Specifications

General

Build Volume	220 x 220 x 250 mm
Filament Diameter	1.75 mm
Nozzle Diameter	0.4 mm
Maximum Bed Temperature	100°C
Print Speed	500 mm/s
Connectivity	Wi-Fi, USB
Supported Materials	PLA, PETG, TPU, ABS
Technology	FDM
Maximum Nozzle Temperature	300°C
Frame	Aluminum
Layer Resolution	50 - 300 microns

Summary

Printer Setup and Initial Operations

Powering On the Printer

Guide for initial power activation of the AnkerMake M5C 3D printer, including powering on procedures.

System Configuration Steps

Instructions on setting up the printer system, including connecting to the app and Wi-Fi/Bluetooth.

Heatbed Leveling Process

Details on how to level the heatbed for optimal printing, including a warning against moving the printer during the process.

Loading Filament Correctly

Steps and tips for loading filament, including preparing the filament tip and inserting it into the extruder.

AnkerMake Slicer Software

Information on downloading and installing the AnkerMake Slicer software for enhanced printing experience.

Initiating a Print Job

Guidance on starting a print job, showing the interface for monitoring the printing progress.