What to do if my anko Coffee Maker cannot work anymore?
If your anko Coffee Maker isn't working, ensure the power cord is correctly plugged into the wall outlet. If it still doesn't work after that, please contact with the authorized service facility for repairing.
Why does my anko Coffee Maker have an acid (vinegar) taste?
An acid taste in your espresso coffee may be due to two reasons. First, it could be that the coffee maker wasn't correctly cleaned after cleaning mineral deposits; in this case, clean the coffee maker per the instructions in “before the first use” for several times. Second, the coffee powder may have been stored in a hot, wet place for too long, causing it to go bad. Use fresh coffee powder, or store unused coffee powder in a cool, dry place, and reseal it tightly in a refrigerator after opening.
How to fix water leaks from the bottom of my anko Coffee Maker?
If water is leaking from the bottom of your anko coffee maker, it could be due to two reasons: either there is too much water in the drip tray, in which case you should clean the drip tray; or the coffee maker is malfunctioning, in which case you should contact with the authorized service facility for repairing.
What to do if the steam cannot froth in my anko Coffee Maker?
If the steam is not frothing, several factors could be at play: * The steam ready indicator may not be illuminated. The steam can only be used to froth after the steam ready indicator lights up. * The container might be too big or the wrong shape. Use a high and narrow cup. * You might be using skimmed milk. Try using whole milk or half-skimmed milk.
General| Type | Coffee Maker |
|---|---|
| Brand | Anko |
| Model | CM8502-GS |
| Category | Coffee Maker |
| Capacity | 1.5L |
| Color | Silver |
| Features | Removable Filter Basket |
Steps to fill the water tank correctly, ensuring it does not exceed the maximum level.
How to add ground coffee to the filter holder and prepare it for brewing.
Procedure to preheat the appliance and cups for optimal coffee flavour and temperature.
Instructions for correctly attaching and securing the filter holder to the machine.
Steps including inserting drip tray, placing cups, and setting steam controller.
Connecting power, observing indicators, pressing the coffee button, and stopping the brew.
Recommended cup sizes and maximum brewing time limits for single and double shots.
Steps for filling the jug with milk, frothing, and turning off the steam.
Important safety warnings regarding appliance temperature and steam after the 'Steam' function.
Detailed steps for cleaning the milk frother nozzle and device.
Turning off the machine and unplugging it from the power outlet.
Allowing the machine to cool and performing a quick wipe-down.
Critical safety warnings regarding burning, short circuits, and damage during cleaning.
Steps for cleaning the filter holder, brewing filter, drip tray, and milk frother nozzle.
Instructions for wiping the housing and ensuring parts are dry before reassembly.
Diagnosing and fixing water leaks from the coffee maker's base or filter side.
Resolving issues like acidic taste, coffee maker not working, or steam not frothing.
Steps for aligning and inserting the filter holder correctly into the machine.
Procedure for safely removing the filter holder by aligning the gap.
To Next Page
