EasyManua.ls Logo

anko H1103B - About White Dust

anko H1103B
7 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2
3
•
Never cover the unit while it is operating.
•
Always keep the cord away from high temperature and fire.
•
If the supply cord is damaged, it must be replaced by the
manufacturer,
its service agent or similarly qualified persons in
order to avoid a hazard.
•
Do not attempt to adjust or repair the unit. Servicing must be
performed
by professional or qualified personnel.
•
Stop using this unit if there is an unusual noise or smell.
•
Unplug this unit when not in use for a long period of time.
•
Do not touch the water or any parts of the unit that are covered by
water
while the unit is on or plugged in.
•
Unplug the appliance during filling and cleaning.
About White Dust:
Use of high mineral content hard water may cause a white mineral residue
to accumulate on surfaces in the room near the humidifier. The mineral
residue is
commonly called “white dust.” The higher the mineral content (or,
the harder your
water is), the greater the potential for white dust. The white
dust is not caused by a defect in the humidifier. It is caused only by minerals
suspended in the water.