How to get rid of peculiar odor from anko H1103B?
If your humidifier emits a peculiar odor, especially when new, open the water tank cap and keep it in a shady and cool place for 12 hours. If the unit is in use, the odour may be due to old water in the tank. Empty the old water, clean the tank and fill with clean water.
How to prevent white dust accumulation in anko Humidifier?
To prevent white dust accumulation, use distilled water when refilling the tank. Additionally, regularly clean the water tank with a brush.
What to do if my anko H1103B power light is off and there is no mist?
If the power light is off and there's no mist, try these steps: First, ensure the unit is properly plugged into a functioning mains power outlet, checking circuits and fuses if necessary. Then, check the water level and refill the tank if it's low. Also, the timer function may have been set and caused the unit to turn off, press the POWER button touch to turn the power on.
Why is my anko Humidifier making excessive noise?
Excessive noise from your humidifier could be due to a few reasons. First, ensure the unit is placed on a flat, even surface. Also, check the water level and refill the tank if it's low. Finally, remove the vent cover and brush or vacuum clean the vent filter.
Basic safety precautions to follow when using electrical products for safe operation.
Utilizes ultrasonic high frequency to convert water into fine mist particles for even dispersion.
Offers choice between warm or cool mist for customized comfort and relief.
Includes a useful night light feature for added convenience.
Programmable timer feature, allowing settings up to 12 hours.
The unit automatically shuts off when the water tank becomes empty.
Turns the humidifier on/off and indicates an empty water tank.
Set desired humidity levels (30%-75%) for automatic humidity control.
Cycles through mist output levels: Low, Ideal, and High.
Activates the timer function, cycling through 0-12 hour settings.
Controls the unit's night light, including brightness adjustment.
Activates the warm mist mode, indicated by a red indicator light.
Allows adding essential oils to a pad in the tray for aromatherapy diffusion.
Rinse the tank with water; use a vinegar mixture for scale removal.
Clean membrane with vinegar/water and a soft brush; avoid touching.
Wipe the humidifier's exterior surface with a clean, damp, soft cloth.
General| Model | H1103B |
|---|---|
| Type | Ultrasonic Humidifier |
| Power Consumption | 25W |
| Weight | 1.2kg |
| Coverage Area | 25 square meters |
To Next Page
