6
BLUETOOTH OPERATION
1. When the unit is turn on, the default mode is Bluetooth mode, the PAIR indicator will
flash at high speed.
2. Turn on the Bluetooth function on the external device, scan “KM42750475” and
connect, then input the password 0000 if required, the PAIR indicator will light up to
indicate connection done. Press Play to start playback.
3. Adjust the volume on unit or external device to your desired level.
4. To pause playback, press button on unit or external device.
5. Press the PAIR button to disconnect Bluetooth.
Note: The Bluetooth works best within a range of 8-10 meters.
AUX-IN OPERATION
This unit has provided special AUX-IN jack, through this jack other audio sources can be
connected to this unit and be amplified.
1. Connect the 3.5mm audio cable into the AUX IN jack and the other end connects to
the AUDIO OUT jack of the external audio source, the unit will turn to AUX-IN mode
directly.
2. Adjust the volume on the main unit or on the external device to your desired level.
3. Press PLAY on the external audio source to start or pause playback.
HAND-FREE OPERATION
After connected the BT, if you have income call, you can press the Answer button to
answer the phone, the conversation will be amplified through the unit speakers. Press
and hold the Answer button for 2 seconds, the call can be rejected. The unit has
provided a built-in microphone to enable speaking. Press the answer button again to cut
off the phone. Press and hold the Answer button for 2 seconds, the last call can be
redialed.
To Next Page
Loading...