EasyManua.ls Logo

anko KRC641 - Page 6

anko KRC641
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6
Fig.1 Fig.2 Fig.3 Fig.4
Before the Rice Cooker is operated, check the cooking pot and
Steam Cap are in place to avoid any malfunction.
During use, the Rice Cooker may generate tiny sound of “click”
or “sizz”, which is a normal sound of operation, this is the
thermostat or steam release.
Never have the Rice Cooker operate again immediately after
cooking. Wait at least for 15 minutes to allow the heating plate
to cool down.
Never cook rice with hot water as this may affect the
temperature measured by the thermostat thus affect cooking
result.
In operation, never cover the top of the Rice Cooker with a
cloth, as this may cause accidents or damage to the Rice
Cooker.
Do not drop the cooking pot, which may cause deformation.
Do not hit the cooking pot with a hard object to avoid
deformation.
Before the Rice Cooker is operated, be sure to wipe away the
water outside the cooking pot to avoid any fault.
Before the Rice Cooker is operated, please remove water drops
and rice grains between the cooking pot and heating plate to
avoid any malfunction.
The coating on the bottom of the cooking pot may wear
off depending on usage frequency, but this does not affect
performance.
Hold the Handle when moving the Rice Cooker.
Do not use the Rice Cooker outdoors.

Related product manuals