Note: During cooking, the system will pause and sound beeps to remind user
to turn food over, and then press START/+30 SEC to resume cooking.
The defrosting time and power level are adjusted automatically once the weight
is programmed.
1. Press DEFROST BY WEIGHT pad.
2. Use the number pads to enter the food weight. (Maximum weight you can
enter is 2700g.)
3. Press START/+30 SEC pad.
Your oven can be programmed up to 3 automatic cooking sequences. It can
be composed of speed defrost with one or two Microwave Cooking program
or composed of two Microwave Cooking program.
A. SPEED DEFROST with one or two-stage Microwave Cooking
1. Input the first stage SPEED DEFROST cooking program. Steps as follows:
1) Press SPEED DEFROST pad once.
2) Enter desired defrosting time by pressing correct number pads.
2. Press TIME COOK pad once and start to input the second stage microwave
cooking program.
For example: If you want to cook the food with 80% power level for 10 minutes
as the second microwave cooking stage, do it as follow:
1) Press the POWER pad three times to show “P-80”.
2) Press 1,0,0,0 to set cooking time.
3. Repeat the step 2 to input the third stage microwave cooking program.
4. Press START/+30 SEC. to start.
NOTE: Step 3 is not necessary if you only have one Microwave Cooking
program. In multi-stage cooking, if one stage is defrosting, then defrosting
shall be placed in the first stage.
To Next Page
Loading...
