EasyManua.ls Logo

anko P90J30AP-F1 - QUICK START; MULTI-STAGE COOKING; SETTING CHILD LOCK

anko P90J30AP-F1
18 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
QUICK START
Directly in standby mode, when you press a number button (1, 2, 3, 4, 5 or 6)
once, The system starts the cooking program directly with the corresponding
time (respectively 1 minute, 2 minutes, 3 minutes, 4 minutes, 5 minutes and
6 minutes). The microwave oven will start to cook at full power level.
MULTI-STAGE COOKING
Your oven can be programmed up to 2 automatic cooking sequences.
Suppose you want to set the following cooking program.
Microwave cooking
Microwave cooking (with lower power level)
1. Input the first microwave cooking program. Do not press START/+30 SEC
button.
2. Input second microwave cooking program.
3. Press START/+30 SEC button to start.
NOTE: Only microwave cooking program can be set in multistage cooking
program.
SETTING CHILD LOCK
The lock prevents unsupervised operation by children.
To enter child lock: In standby mode, if there is not any operation within one
minute, a beep will sound and the lock indicator light will turn on. In the lock
state, all buttons are disabled. Press any button, lock indicator light will turn on.
To cancel: In child lock mode, open and close the oven door once to cancel the
program.

Related product manuals