anko P90N28AP-S3 - Quick Start and 30-Second Increment; Setting Speed Defrost; Defrost by Weight; Cook by Weight

11
Use single digit to set a cooking power level:
Number
pad
Cooking power
(Display)
Number
pad
Cooking power
(Display)
1,0
100% (PL10)
5
50% (PL-5)
9
90% (PL-9)
4
40% (PL-4)
8
80% (PL-8)
3
30% (PL-3)
7
70% (PL-7)
2
20% (PL-2)
6
60% (PL-6)
1
10% (PL-1)
NOTE: During cooking, the current power level can be seen by pressing the
POWER LEVEL pad. You can adjust the power level by pressing the number
pads when the display shows it.
QUICK START/+30SEC
In standby mode, press START/+30 SEC pad repeatedly to enter cooking
time (each press will add 30 seconds, up to 99 minutes and 59 seconds). The
oven will start automatically at 100% high power level. During cooking (except
auto cook menu and defrost by weight program), you can add cooking time by
pressing START/+30 SEC pad.
SETTING SPEED DEFROST
1. Press SPEED DEFROST pad.
2. Use the number pads to enter defrosting time. The longest time is 99
minutes 99 seconds.
3. Press START/+30 SEC pad to start.
DEFROST BY WEIGHT
The oven allows the defrosting of meat, poultry, and seafood. The time and
the defrosting power are adjusted automatically once the weight is
programmed. The maximum weight you can set is 2300g.
FOR EXAMPLE: Suppose you want to defrost 60g of shrimp.
1. Place the shrimp to be defrosted into the oven.
2. Press DEFROST BY WEIGHT button once.
3. Press number pad to enter the food weight.
4. Press START/+30 SEC button to start.
COOK BY WEIGHT
1. Press COOK BY WEIGHT pad once.
2. Enter the one digit code by touching the correct number pad (1~3).
3. Use the number pads to enter weight.