Need help?Do you have a question about the anko QL-5915A and is the answer not in the manual?
Key safety precautions to follow when using any electrical appliance to prevent injury or damage.
Covers fire risks, electrical requirements, handling precautions, and environmental warnings.
Details the intended use of the hair dryer and usage recommendations.
Diagram and listing of all components of the hair dryer.
Guidance on what to do before using the appliance for the first time.
Instructions for adjusting the appliance's voltage selector to match local supply.
Steps and controls for operating the hair dryer, including speed and cool shot.
Procedures for cleaning the rear grille and the appliance body.
Guidance on how to store the hair dryer when not in use to prevent damage.
Information on how to properly dispose of the product according to regulations.
Key electrical and performance data for the hair dryer.
Terms and conditions of the manufacturer's warranty for the product.
Key safety precautions to follow when using any electrical appliance to prevent injury or damage.
Covers fire risks, electrical requirements, handling precautions, and environmental warnings.
Details the intended use of the hair dryer and usage recommendations.
Diagram and listing of all components of the hair dryer.
Guidance on what to do before using the appliance for the first time.
Instructions for adjusting the appliance's voltage selector to match local supply.
Steps and controls for operating the hair dryer, including speed and cool shot.
Procedures for cleaning the rear grille and the appliance body.
Guidance on how to store the hair dryer when not in use to prevent damage.
Information on how to properly dispose of the product according to regulations.
Key electrical and performance data for the hair dryer.
Terms and conditions of the manufacturer's warranty for the product.
This document outlines the user manual for the Anko QL-5915A Hair Dryer, providing essential information for its safe and effective operation, maintenance, and storage. The hairdryer is designed exclusively for drying human hair and is not recommended for use on artificial hair, animals, or damaged/bleached hair. Users are advised to perform a trial on a hidden spot before first use, as results may vary depending on hair type.
The Anko QL-5915A Hair Dryer is an electrical appliance intended for household use to dry and style hair. It features an air outlet for directing airflow, a rear grille/air inlet for air intake, a cool shot switch for temporarily cool air, and a fan speed switch to adjust the blowing strength. The device also includes a foldable handle for compact storage and a hanging loop for convenient placement. A concentrator nozzle is provided to focus the airflow for precise styling. A voltage selector allows the user to adapt the appliance to different mains voltages, ensuring compatibility in various regions.
Before using the hairdryer, it is crucial to read all instructions carefully and ensure the appliance is placed on a dry, level, clean surface, free from liquids. The power cord must be fully unwound before use to prevent tangling and potential hazards.
To operate the hairdryer, first, ensure the fan speed switch is in the OFF (0) position. Plug the appliance into the mains supply and switch it on. If desired, the concentrator nozzle can be attached to the air outlet by pressing it firmly into place. The concentrator can be removed after use, but it's important to allow it to cool down first as it can become hot during operation.
The hairdryer offers adjustable blowing strength via the fan speed switch:
For a burst of cool air, the cool shot switch can be pressed and held. This feature is useful for setting styles. Once drying or styling is complete, switch the appliance OFF, unplug it from the mains, and allow it to cool before storing.
A critical safety feature is the voltage selector, located on the handle. Before connecting the appliance, users must check the local mains voltage and adjust the selector switch accordingly using a screwdriver or a small coin. For Australia, the voltage selector must be set to 220-240V AC. Failure to set the correct voltage can result in permanent damage to the appliance. This adjustment is particularly important when traveling to different countries or returning home.
The hairdryer is designed for safe operation, but users must never leave it unattended while in use. To prevent overheating and fire risk, the appliance should never be covered, especially not under a blanket or in poorly ventilated areas. It should also be kept away from other heat sources like direct sunlight or other heating appliances. An extension cable should not be used.
Regular maintenance is essential to ensure the longevity and safe operation of the Anko QL-5915A Hair Dryer.
The rear grille, which also serves as the air inlet, can become clogged with dust and dirt during use. If this occurs, the rear grille should be removed for cleaning. Dust and dirt can be removed using a dry brush. It is recommended to clean the unit at least once a month to maintain optimal airflow and prevent overheating.
Before any cleaning, always turn off the appliance and disconnect the plug from the power outlet.
When not in use, store the hairdryer in a cool, dry location, out of reach of children and pets. If the appliance will not be used for an extended period, it is best to store it in its original packaging to protect it from damage. After use, avoid wrapping the power cord tightly around the appliance, as this can cause the cord to fracture. Instead, coil the cord loosely by the side of the appliance when storing.
The hairdryer is a Class II appliance, indicating it has double insulation and does not require a safety connection to electrical earth. For additional protection in bathrooms, the installation of a residual current device (RCD/Safety switch) with a rated residual operating current not exceeding 30mA is advisable in the electrical circuit. If unsure, consult an electrician.
The manual emphasizes the importance of reading and saving these instructions for future reference, ensuring users can always refer back to safety guidelines and operational procedures.
General| Voltage | 220-240V |
|---|---|
| Frequency | 50Hz |
| Speed Settings | 2 |
| Heat Settings | 3 |
| Cool Shot Button | Yes |
| Foldable Handle | Yes |
| Weight | 0.5 kg |
| Settings | 3 |
To Next Page