Check in case the hose has become kinked or blocked, or that
you have not run out of water and there is mains power supplied
to the steamer.
I can't get the pressure cap off
Make sure that you have fully de-pressurized the boiler See the
section REFILLING THE WATER TANK.
Steam flow is erratic; sometimes it
works really well, sometimes not so
good
If you have not used pure water, you may have a small blockage
inside your Steam Cleaner.
I have hard water where I live and
used boiled water from the kettle to
fill the water tank.
I have left water in the boiler after
use, now my Steam Cleaner doesn't
work well at all.
Actually, you have made matters worse because boiled water
concentrates the minerals that form lime scale rather than
boiling them away. Water left in the boiler will go off and may
create a reaction with the boiler and/or the steam hose. So,
ALWAYS empty the machine after use and NEVER use boiled
water. To prolong the life of the steamer we recommend using
distilled water to fill the water tank.
CLEANING AND STORAGE
• Clean the steam cleaner after each use.
• Remove the power cord from the power outlet socket and ensure the appliance is thoroughly cooled
before cleaning.
• Clean the appliance and accessories with a damp cloth or sponge. Wipe dry with a soft dry cloth.
• Wash the fabric steam covering and mop in warm, soapy water, and then rinse and dry thoroughly.
• Make sure all components are clean and dried thoroughly before storing.
• Store the appliance in a clean and dry location. Do not place anything on top. Store the accessories
alongside the appliance where they will not be damaged and won’t cause a hazard.
TECHNICAL SPECIFICATION
Voltage: 220-240V~ 50-60Hz
Power: 1500W
Water tank capacity: 1.2L
To Next Page
