Baby Monitor
Baby Monitor
Thank you for purchasing this baby monitor . We will try to give you the best
products and service .
Congratulaon!
Now you can take care of your babies any where and any me ! Please read the
user manual before you use !
Please retain your original dated sales receipt for your records.
For warranty service of your baby monitor, you will need to provide a copy of your
dated sales receipt to confirm warranty status. Registraon is not required for
warranty coverage.
Before you use the product, we recommend you fully charge the baery in the
parent unit, so that it connues to work if you disconnect it from the power supply
to carry it to another locaon. Please read the Safety instrucons.
Please make sure you have the following in this packing.
1. Parent unit x 1;
2. Baby unit x 1;
3. Adapter x 2;
4. User manual x 1;
1. SAFETY INSTRUCTIOINS :
CAUTION: Keep small parts away from children.
Strangulaon Hazard: Children can become entangled in cords. Power cords should
be kept more than 3 feet away from the crib and baby's reach at all mes.
Baby monitors and cameras with power cords should never be hung on or near the
crib. This product is not a toy and should be kept out of children's reach.
This product contains small parts. Exercise care when unpacking and assembling
the product.
Read and keep instrucons: All the safety and operang instrucons should be
read before the video baby monitor is operated.
This product cannot replace responsible adult supervision.
Water and moisture: This product is designed for indoor use only. The unit should
not be exposed to rain, moisture, dripping or splashing.
No objects filled with liquid should be placed on top of, or beside the product, such
as a glass or vase. This item should not be used near water.
DO NOT: Use the appliance if the cord or plug is damaged . If your baby monitor is
not operang properly or has suffered any damage, contact service center to
request inspecon and repair it in order to avoid any possible risk.
DO NOT: Aempt to repair or adjust any of the electrical or mechanical funcons
of the unit since, if you do, the guarantee will be made void.
Venlaon: This baby monitor should not be used on a bed, sofa, rug or similar
surface that may block the venlaon openings, or be placed in an enclosed area,
such as a bookcase or drawer that may impede air flow.
Keep away from sources of heat: This unit should not be exposed to direct heat
sources such as a candle, replace, radiator, heat register, stove or other appliance
that emits heat. The unit should not be le in direct sunlight.
Power source: This unit should only be used with the AC power adapters included
in this package (rated 5V 600mA).
Damage requiring service: This unit should be serviced by qualified personnel .
–2–
2.4GHz Digital Wireless Video Baby Monitor
SM 24 User Manual
The features described in user’s manual are subject to
modifications without prior notice.
WARNING:
Keep the small parts from away children
BabyMonitor
–1–
FCC STATEMENTS:
This device complies with part 15 of the FCC Rules. Operaon is subject to
the following two condions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that
may cause undesired operaon.
NOTE 1: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protecon against harmful interference in
a residenal installaon.
This equipment generates, uses and can radiate radio frequency energy and,
if not installed and used in accordance with the instrucons, may cause harmful
interference to radio communicaons. However, there is no guarantee that
interference will not occur in a parcular installaon.
If this equipment does cause harmful interference to radio or television recepon,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separaon between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
NOTE 2: Any changes or modificaons to this unit not expressly approved by the
party responsible for compliance
could void the user's authority to operate the equipment.
–10–
–3–
FCC WARNING
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protecon against harmful interference in a residenal
installaon. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instrucons, may
cause harmful interference to radio communicaons.
However, there is no guarantee that interference will not occur in a parcular
installaon. If this equipment does cause harmful interference to radio or
television recepon, which can be determined by turning the equipment of
and on, the user is encouraged to try to correct the interference by one or more
of the following measures:
*Reorient or relocate the receiving antenna.
*Increase the separaon between the equipment and the receiver.
*Connect the equipment into an outlet different from that to which the receiver
is connected.
*Consult the dealer or an experienced radio/TV technician for help.
IC STATEMENTS:
This device complies with Industry Canada licence-exempt RSS standard(s):
Operaon is subject to the following Two condions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may
cause undesired operaon of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux
appareils radio exempts de licence.
–5–
–7–
L'exploitaon est autorisée aux deux condions suivantes :
(1)l'appareil ne doit pas produire de brouillage, et
(2) l'ulisateur de l'appareil doit accepter tout brouillage radioélectrique subi,
même si le brouillage est suscepble d'en compromere le fonconnement.
2. WARRANTY TERMS
We take quality very seriously. This is why all of our products come with a one year
warranty from the original purchase date against defects in workmanship and
materials. If you have warranty or support issues please contact the store where
you purchased the product , or the customer service:ecool@minilabo.net
3. Important guidelines for installing your baby monitor.
*To use your parent unit and baby unit together, you must be able to establish a radio
link between them, and the range will be affected by environmental condions.
*Any large metal object, like a refrigerator, a mirror, a filling cabinet, metallic doors
or reinforced concrete between the baby and parent unit may block the radio signal.
*The signal strength may also be reduced by other solid structures, like walls,
or by radio or electrical equipment, such as TV, computers, cordless or mobile
phones, fluorescent lights or dimmer switches.
*Use of other 2.4GHz product, such as wireless networks (Wi-Fi routers), Bluetooth
systems, or microwave ovens, may cause interference with this product, so keep the
baby monitor away at least 5(1.5m) from these types of products, or turn them off
if they appear to be causing interference.
4. PRODUCT OVERVIEW
4.1 Parent unit overview:
Power key
Power & Charging LED
Volume LED
2.4'' LCD screen
Speaker
USB-jack
Menu/Eixt
OK
Talk to baby
Volume - / Down key
Brightness + / Right key
MIC
Brightness - / Left key
Volume + / Up key
Stand
Reset key(under stand)
4.2 Baby unit overview:
MIC
Light sensor
Infrared LEDs
CMOS sensor
Power LED
Speaker
Pair key
DC-Jack
Temperature
sensor
–6–
4.3 ICONS OVERVIEW:
---- Signal
----- Volume
---- Brightness
---- Alarm
---- Lullaby
------ ECO
---- Camera
---- Baery
----- Zoom
------ Talk to baby
— Temperature
28℃
----- Night vision
ECO
5. PLACEMENT OF THE BABY MONITOR:
Aim the camera(s) to best opmize the viewing area: Select a locaon for the
camera that provides a clear view of the area you want to monitor, which is free
from dust, and is not in line-of-signt to a strong light source or direct sunlight.
Avoid installing the camera where there are thick walls or obstrucons between
the camera and the monitor.
STRANGULATION HAZARD--keep cord out of child’s reach. Never place camera
or cords within 3 feet of crib or playpen. NEVER use extension cords with
AC adapters. only use the AC adapters provided.
6. Using the baby monitor
6.1 TURN ON THE BABY UNIT:
*Only use the A/C adapter included in this package (5V, 600mA);
Use the provided AC adapter to connect the wall outlet with the baby unit;
Once the adapter connected then the unit will turn on automac and the
power LED will light up.
–4–
To Next Page
Need help?
General
