(1) Reset the IP camera if you have connected your device to
network(According to Page 4: How to reset).
(2) Insert the network cable, the status lamp on the IP camera will
turn blue and keep constant, meaning connected to the network
(3) Make sure your phone and your device are in the same network .
Open the app Annke View , enter Devices—Online Device. You can
see the IP address, noticing “ Inactive”, follow the step to activate the
device and remember the IP address.(According to WPS Pairing at
(4) Make sure your PC and your device are in the same network.
Open the browser on your PC. Enter the IP address of the camera,
input user name and password to login. You can stop downloading
the OCX control if you do not want to view live video via PC
temporarily. (You can also login via smart phone browser if you do
(5) After login, enter Configuration—Advanced Configuration
Select the right WIFI to connect in the list , enter the password and
save. Then unplug the network cable, the status light turns out , later
turns blue and then green and keeps on, which indicates WIFI
To Next Page
Loading...