Plunger Pumps
Operating Instructions and Parts Manual SJ & XJ Series Pumps
First Choice When Quality Matters
NORTH
AMERICA
Please read and save these instructions. Read carefully before attempting to assemble, install,
operate or maintain the product described. Protect yourself and others by observing all safety
information. Failure to comply with instructions could result in personal injury and/or property
damage! Retain instructions for future reference.
Operating Instructions and Parts Manual SJ & XJ Series Pumps
Form SJ-XJ-OM 1006
Description
This plunger pump will pump up to 2.5 GPM
at 2500 PSI. It spins at 3400 RPM in a direct
drive system coupled with a gasoline engine.
The matching flange provides convenient
connection to most 3/4” shaft 3.5 - 6.5 HP
engines. The hollow shafted pump includes
a built-in pressure control valve, and
chemical injection system.
Figure 3 - XJV-F8
Figure 2- SJW-F27 & XJW-F27
SJV 3400 rpm D Version
Model Max GPM Max PSI
SJV2.5G24D-F7 2.5 2500
SJV2.5G25D-F7 2.5 2500
SJV2.5G27D-F7 2.5 2700
SJV3G27D-F7 3.0 2700
SJV3G27D-EZ 3.0 2700
SJW 3400 rpm D Version
Model Max GPM Max PSI
SJW3G25D-F27 3.0 2500
XJV 3400 rpm E Version 5/8”
Model Max GPM Max PSI
XJV2G15E-F8 2.0 1450
XJV3G20E-F8 3.0 2000
XJW 3400 rpm D Version
Model Max GPM Max PSI
XJW2G25D-F27* 2.0 2500
XJW2.5G25D-F27 2.5 2500
XJW3G25D-F27 3.0 2500
Figure 1 - SJV-F7
Special Note: Use only AR64545 for the XJ/SJ/BK Series pumps only: Do NOT change oil.
Use oil only to add if low. This oil is a specially formulated synthetic with special additives
for the demands of the XJ, SJ and BK pump series. No other oil is factory approved for these
pumps, and could result in pump failure.
Available from Allparts Equipment and Accessories - 1-877-475-5660 - www.allpartsinc.com
To Next Page
Need help?
General
