Annovi Reverberi AR 215 bp User Manual

Annovi Reverberi AR 215 bp

20 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

AR 215 bp

AR 250 bp

AR 280 bp

Istruzioni originali

Original instructions

Notice originale

Originalanleitung

Instrucciones originales

Edizione - Edition - Édition - Ausgabe - Edición: 01/2019

Dati tecnici e prestazioni - Technical and Performance Data - Données techniques et performances

Datos técnicos y prestaciones - Technische Daten und Leistungsmerkmale

Modello

Model

Modèle

Modell

Modelo

Portata max

Max. flow

Débit max.

Max. Fördermenge

Caudal máx.

Pressione max

Max. pressure

Pression max.

Max. Druck

Presión máx.

N° giri max

Max. rpm

Nbre tours max.

Max. Drehzahl

R.p.m. máx.

Temperatura max

Max. temperature

Température max.

Max. Temperatur

Temperatura máx.

Peso

Weight

Poids

Gewicht

Peso

L/1'

l/min

gpm

U/min

bar psi °C °F kg lb

AR 215bp

219, 1 57,9 20 290 550 60 140 38,5 85

AR 250bp

254,4 67,2 20 290 550 60 140 38,5 85

AR 280bp

277, 8 73,4 20 290 550 60 140 38,5 85

N° codice manuale

Manual code no.

N° code de la notice

Kode der Betriebs-und

Installationsanleitung

N° código manual

91402

MANUALE D’USO E INSTALLAZIONE / INSTRUCTION MANUAL

NOTICE D’UTILISATION ET INSTALLATION

MANUAL DE USO E INSTALACIÓN

BETRIEBS- UND INSTALLATIONSANLEITUNG

Table of Contents

Questions and Answers:

R
Randy SanchezAug 18, 2025
Why is my Annovi Reverberi Water Pump not reaching the required pressure?
- C
  christopherhudsonAug 18, 2025
  If the Annovi Reverberi Water Pump is not delivering the required pressure, several factors could be at play. The seats and plates of the intake and delivery valves might be worn, requiring replacement. Alternatively, the nozzles could be worn or too large, in which case you should replace them with nozzles of a suitable diameter. A restriction in the intake circuit could also be the cause, so remove any obstructions. Lastly, a fouled intake filter can cause this issue; cleaning the filter cartridge should resolve it.
K
Kristy JamesAug 21, 2025
What to do if Annovi Reverberi AR 215 bp has increased noise and oil drop?
- A
  Arthur PattersonAug 21, 2025
  If you notice an increase in noise and a simultaneous drop in oil level, which indicates pump cavitation in your Annovi Reverberi Water Pump, there are a few things to check. First, inspect the intake circuit for any restrictions and remove them. Also, examine the intake filter for fouling and clean the filter cartridge if necessary. Finally, ensure the pump isn't drawing liquid from too low a level; refer to the “Pump Intake Conditions” section for guidance.
W
William HullAug 23, 2025
Why is the pressure gauge wobbling on my Annovi Reverberi Water Pump?
- R
  rick64Aug 23, 2025
  If the pressure gauge needle is wobbling and the pressure is throbbing in your Annovi Reverberi Water Pump, several issues could be the cause. Ensure the intake circuit is airtight; tighten, repair, or replace hoses and fittings as necessary. Residual air inside the pump can also cause this, so discharge the air by opening a ball valve/central unit connected to the delivery side while the pump is running. A valve plate stuck to its seat may also be the problem, so clean or replace the intake and delivery valves. Lastly, check if the pressure accumulator is deflated and inflate it to the correct pressure.
H
hobrienAug 26, 2025
How to fix oil leak on Annovi Reverberi AR 215 bp Water Pump?
- R
  Richard JacksonAug 26, 2025
  If you observe oil on the body or base of your Annovi Reverberi Water Pump, it could be due to a worn oil seal on the pump shaft, which would require replacement. Alternatively, the oil pressure inside the pump might be too high; in this case, restore the correct oil level in the tank.
K
Kathy JohnsonAug 28, 2025
Why is my Annovi Reverberi AR 215 bp Water Pump not priming?
- J
  Jennifer SpencerAug 28, 2025
  If the Annovi Reverberi Water Pump is not priming properly, it could be due to a couple of reasons. First, check if the intake circuit is airtight; if not, tighten, repair, or replace hoses and fittings as necessary. Second, make sure the distributor switching lever is not on the “Pressure” setting; if it is, move it to the “By-pass” setting.
A
Alex LangAug 30, 2025
What causes uneven flow in Annovi Reverberi AR 215 bp Water Pump nozzles?
- D
  Douglas PetersonAug 30, 2025
  If you're experiencing an uneven flow of liquid to the nozzles on your Annovi Reverberi Water Pump, the pressure accumulator may be deflated. Inflate the accumulator to the correct pressure to resolve this issue.
P
pgraySep 2, 2025
What to do if Annovi Reverberi Water Pump is using too much oil?
- H
  harrisoncharlesSep 2, 2025
  If your Annovi Reverberi Water Pump is using too much oil (oil flowing from the delivery port) or the oil is whitish in color (water/oil emulsion in the tank), it indicates that one or more diaphragms have ruptured. Stop the pump immediately and replace the diaphragms.
M
Mark SmithSep 4, 2025
Why is my Annovi Reverberi AR 215 bp not reaching required pressure?
- T
  tdoyleSep 4, 2025
  If the Annovi Reverberi Water Pump isn't reaching the required pressure, it could be due to several reasons. The seats and plates of the intake and delivery valves might be worn, in which case you should replace them. Also, check if the nozzles are worn or too large; replace them with suitable diameter nozzles. A restriction in the intake circuit could also be the cause; remove any obstructions. Lastly, a fouled intake filter can cause this issue, so clean the filter cartridge.
G
Gina ReedSep 7, 2025
What to do if Annovi Reverberi AR 215 bp Water Pump has noise increase and oil drop?
- K
  Kimberly KingSep 7, 2025
  If you notice an increase in noise and a simultaneous drop in oil level in your Annovi Reverberi Water Pump, it could be experiencing cavitation. This might be due to a restriction in the intake circuit, so removing any obstructions is advised. Another possible cause is a fouled intake filter; cleaning the filter cartridge could resolve the issue. Also, ensure the pump isn't drawing liquid from too low a level; refer to the “Pump Intake Conditions” section for guidance.
Z
Zachary SchultzSep 10, 2025
Why does the pressure gauge needle wobble on my Annovi Reverberi AR 215 bp Water Pump?
- B
  Brandi JohnstonSep 10, 2025
  If the pressure gauge needle wobbles and the pressure is throbbing in your Annovi Reverberi Water Pump, it could be due to several reasons. The intake circuit may not be airtight; in this case, you should tighten, repair, or replace hoses and fittings as necessary. Residual air inside the pump can also cause this; discharge the air by opening a ball valve/central unit connected to the delivery side with the pump in operation. A valve plate stuck to its seat could also be the cause; clean or replace the intake and delivery valves. Lastly, a deflated pressure accumulator can lead to this issue; inflate the accumulator to the correct pressure.

Annovi Reverberi AR 215 bp Specifications

General

Brand	Annovi Reverberi
Model	AR 215 bp
Category	Water Pump
Language	English

Related product manuals

Preview: Annovi Reverberi AR 250 bp

Annovi Reverberi AR 250 bp

Preview: Annovi Reverberi AR 280 bp

Annovi Reverberi AR 280 bp

Preview: Annovi Reverberi AR 202

Annovi Reverberi AR 202

Preview: Annovi Reverberi AR 50

Annovi Reverberi AR 50

Preview: Annovi Reverberi AR 185 LFP

Annovi Reverberi AR 185 LFP

Preview: Annovi Reverberi AR 30 Series

Annovi Reverberi AR 30 Series

Annovi Reverberi AR30-SP

Preview: Annovi Reverberi AR1064-C/C

Annovi Reverberi AR1064-C/C

Preview: Annovi Reverberi BHS 130

Annovi Reverberi BHS 130

Annovi Reverberi SJV3G27D-EZ

Annovi Reverberi SJV2.5G27D-F7

Preview: Annovi Reverberi SJV2.5G24D-F7

Annovi Reverberi SJV2.5G24D-F7