SETTING UP
fill a pot
• Fill a pot or container with water.
• Place it on a heat-safe surface or trivet, away from counter edges.
attach your cooker
• Loosen the rear screw on your Anova Precision® Cooker clamp.
• Fit the clamp over the edge of your pot or container.
• Tighten the rear screw so it is snug against the wall of the pot.
plug in
• Plug in your Anova Precision® Cooker.
• Place your food in a sealable bag and lower the bag into the water.
• Clip the bag to the side of the pot or container. (optional)
Master EU.indb 5Master EU.indb 5 16/08/2024 8:39:28 AM16/08/2024 8:39:28 AM
To Next Page
Loading...
