For Safety
v
CAUTION
•
Always remove the main power cable from the power outlet before
cleaning dust around the power supply and fan.
- Clean the power inlet regularly. If dust accumulates around the
power pins, there is a risk of fire.
- Keep the cooling fan clean so that the ventilation holes are not
obstructed. If the ventilation is obstructed, the cabinet may
overheat and catch fire.
•
Never input a signal of more than the indicated value between the
measured terminal and ground. Input of an excessive signal may
damage the equipment.
•
This is a heavy object. When lifting and moving this equipment,
always work in a group of two or more, or use a trolley. There is a
risk of back injury, if this equipment is lifted or moved by one person.
Cleaning
To Next Page
Loading...
