Need help?Do you have a question about the Anritsu SQA-R MP1900A and is the answer not in the manual?
General| Category | Measuring Instruments |
|---|---|
| Output Level Accuracy | ±0.5 dB |
| Non-Harmonic Spurious | <-60 dBc |
| Type | Signal Quality Analyzer |
| Functions | Jitter Analysis, Eye Diagram Analysis |
| Applications | Optical communication testing |
| AM Modulation Depth | 0% to 100% |
| Interface | GPIB, Ethernet, USB |
| Power Supply | 100 to 240 VAC, 50/60 Hz |
Details the modular design and module options for versatile interface testing.
Highlights features like 10Tap Emphasis and Variable ISI for signal analysis.
Covers receiver tests supported by built-in protocol awareness and LTSSM analysis.
Focuses on low intrinsic jitter output and high-sensitivity data input capabilities.
Discusses the need for testing high-speed interfaces like PCIe Gen5 and USB4.
Lists key application areas such as USB, PCIe, and Storage Devices.
Details software for automating receiver tests, calibration, and report generation.
Explains how real-time oscilloscopes can be used with the MP1900A for calibration.
Accurately replays simulated waveforms corrected for channel loss.
Evaluates TRX performance with hardware equalization for closed eyes.
Tests receiver tolerance with stressed signals and added jitter/noise.
Evaluates PCIe PHY layer and troubleshoots faults using LTSSM analysis.
Facilitates USB PHY layer evaluation and fault troubleshooting with LTSSM analysis.
Features a PPG with an intrinsic jitter of just 115 fs rms for accurate output.
Offers an assured ED input analog bandwidth of 40 GHz for accurate eye margin evaluation.
Features intuitive GUI, large LCD, and multi-window display for efficient operation.
Details base spec receiver tests for PCIe Gen3/4/5, including crosstalk.
Covers CEM specification receiver tests for PCIe Gen3/4/5 with link training.
Describes receiver tests for SAS-3 and SAS-4 interfaces, including wideband BERTS.
Focuses on receiver testing for USB Type-C, USB4, and Thunderbolt3.
Explains receiver tests for USB 3.2 Gen1/2, including link training.
Details DisplayPort 1.4 sink tests, including wideband PPG and alternative mode.
Covers evaluation of high-speed interconnects, including multi-channel and jitter tests.
Demonstrates PAM4 signal jitter tolerance testing with the MP1900A.
Covers InfiniBand EDR AOC evaluation, including BER and jitter analysis.
Details the physical layout and connectors on the front and rear panels.
Describes the connectors and functions of the 21G/32G bit/s SI PPG module.
Details the connectors and functions of the 21G/32G bit/s SI ED module.
Outlines the connectors and functions of the PAM4 PPG module.
Describes the connectors and functions of the PAM4 ED module.
Details the connectors and functions of the Noise Generator module.
Explains the connectors and functions of the 12.5 GHz 4port Synthesizer.
Details the connectors and functions of the Jitter Modulation Source.
Describes the connectors and functions of the 28G/32G bit/s PPG module.
Outlines the connectors and functions of the 28G/32G bit/s High Sensitivity ED module.
Provides general specifications for the MP1900A Signal Quality Analyzer-R.
Provides detailed specifications for the 12.5 GHz 4 Port Synthesizer module.
Lists detailed specifications for the Jitter Modulation Source module.
Details specifications for the Noise Generator module.
Provides detailed specifications for the 21G/32G bit/s SI PPG module.
Lists detailed specifications for the 21G/32G bit/s SI ED module.
Details specifications for the PAM4 PPG module.
Provides specifications for the PAM4 ED module.
Lists ordering information for the main MP1900A frame and its standard accessories.
Provides ordering details for the MU181000B 12.5 GHz 4port Synthesizer module.
Lists ordering information for the MU181500B Jitter Modulation Source module.
Details ordering options for the MU195020A 21G/32G bit/s SI PPG module.
Provides ordering options for the MU195040A 21G/32G bit/s SI ED module.
Lists ordering options for the MU196020A PAM4 PPG module.
Details ordering options for the MU196040B PAM4 ED module.
Provides ordering options for the MU183020A 28G/32G bit/s PPG module.
Lists ordering options for the MU183040B 28G/32G bit/s High Sensitivity ED module.
Lists various optional accessories available for the MP1900A system.
Details the component set required for PCIe Gen3/4/5 Tx/Rx LEQ testing.
To Next Page