35
Signal Quality Analyzer-R MP1900A Ordering Information
Optional Accessories
Model/Order No. Name
J1632A
V210
J1678A
J1679A
J1359A
34VFK50A
34VKF50A
41KC-3
41KC-6
41KC-10
41KC-20
41VA-3
41VA-6
41VA-10
41VA-20
J1758A
J1800A
K261
K240C
V240C
J1510A
J1793A
K241C
J1748A
J1624A
J1342A
J1439A
J1625A
Terminator
TERMINATOR (V)
ESD Protection Adapter-K
ESD Protection Adapter-V
Coaxial Adapter (K-P, K-J, SMA)
Fixed Adapter (V-F, K-M)*
6
Fixed Adapter (V-M. K-F)
Fixed Attenuator 3 dB
Fixed Attenuator 6 dB
Fixed Attenuator 10 dB
Fixed Attenuator 20 dB
Fixed Attenuator 3 dB
Fixed Attenuator 6 dB
Fixed Attenuator 10 dB
Fixed Attenuator 20 dB
ISI Board
ISI Board V
DC Block
Precision Power Divider
Fixed Power divider
Pick OFF Tee (K)
Pick OFF Tee (V)
Power Splitter
Power Splitter (1.5 GHz to 18 GHz, SMA, using MU195020A ×
4 to MU181500B connection)
COAXIAL CABLE 0.3 m (18 GHz and SMA)
COAXIAL CABLE 0.8 m (APC3.5 connector)
Coaxial cable (0.8 m, K connector)
Coaxial Cable 1 m (18 GHz, SMA)
Model/Order No. Name
J1449A
J1550A
J1551A
J1728A
J1741A
J1789A
J1790A
J1792A
J1761A
Z2025A
Z2029A
W3911AE
W3913AE
W3813AE
W3915AE
W3976AE
B0576A
B0736A
B0737A
B0738A
Z1746A
Z0541A
J0008
Z0917A
Z1953A
Z0306A
Z1964A
Measurement kit (J1324A × 2, J1439A × 2, J1625A × 1)
Coaxial skew match cable (0.8 m, APC3.5 connector)
Coaxial skew match cable (0.8 m, K connector)
Electrical Length Specified Coaxial Cable (0.4 m, K connector)
Electrical Length Specified Coaxial Cable (0.8 m, K Connector)
Electrical Length Specified Coaxial Cable*
6
(0.4 m, V connector)
Electrical Length Specified Coaxial Cable*
6
(0.8 m, V connector)
Skew match pair semirigid cable
( V-K connector, MU196020A PPG Output to MU195050A
Noise Data Input1)
PCIe Reference Clock Cable Kit
PCIe CBB Controller
PCIe Reference Clock Buffer
MP1900A Operation Manual
MX190000A Operation Manual
MX183000A Operation Manual
MU195020/40/50A Operation Manual
MU196020/40A OPERATION MANUAL
Blank Panel
Front Cover (For MP1900A)
Carrying Case (For MP1900A, with B0736A)
Rack Mount Kit (For MP1900A)
Stylus
USB Mouse
GPIB CABLE, 2.0 m
Shielded LAN Cable, 5 m
Gigabit Ethernet Switch (5 Port)
Wrist Strap
Torque Wrench (Right Angle)
*
6: We recommend using either the J1789A or J1790A as the coaxial cable for the MU196020A data output. Recommend using coaxial cable J1789A for MU196040B Data IN.
The MU196020A data output specifications are defined based on the performance observed using a 70-GHz bandwidth oscilloscope connected as shown below.
70 GHz BW
Sampling
Oscilloscope
PAM4 PPG MU196020A
DUT
J1789A or J1790A cable × 2
Test point
PAM4 PPG MU196020A
DUT
K connector
J1789A or J1790A cable × 2 J1789A cable × 2
PAM4 ED MU196040B
DUT Connection Setup for K-connectors
Adapter
34VFK50A × 2
The MU196020A Data OUT and MU196040B Data IN connectors, and the J1789A/J1790A cables all use V-connectors. Consequently, for K-connectors, use 34VFK50
adapters as shown in the following figure.
J1815A MP1900A PCIe Measurement Component Set
The following table lists the component set required by the PCIe Gen3/4/5 Tx/Rx LEQ test.
Item Description Qty. Remarks
Optional Accessories MP1900A PCIe Measurement Component Set 1
J1815A
Accessories Qty. Comment
Coax skew match cable, 0.8 m K connector 4 Junflon J12J103220-00-1
AE-TMC-10205 2 Coax cable, 1 m, SMA connector
PICK OFF TEE 2 Anritsu 3-68231
SMPF-SMAJ-TFLEX-10CM-5PS 2 SMP to SMA adapter cable
BNC-SMA cable 2
K261 2 DC Block
K241C 2 Power Splitter
To Next Page
Loading...
