To Next PageTo Next Page
Need help?Do you have a question about the Anritsu s361e and is the answer not in the manual?
General| Power Resolution | 0.01 dB |
|---|---|
| Frequency Resolution | 1 Hz |
| Output Impedance | 50 ohm |
| Dynamic Range | > 100 dB |
| Display | Color LCD |
| GPS | Optional |
| Power | AC 100-240 V, 50/60 Hz or DC 10.8-15 V |
| Interface | USB |
| Harmonics | <-30 dBc |
| Battery Life | Approx. 4 hours (with standard battery) |
Covers calibration, verification, care, ESD, and battery replacement.
Details the interface screen, symbols, display settings, and touch screen calibration.
Guide to basic setup for Cable & Antenna Analyzer mode.
Guide to basic setup for Spectrum Analyzer mode.
Procedures for saving, recalling, copying, and deleting files.
Procedure for updating the instrument's firmware using a USB stick.
Introduction and steps for establishing a LAN or Wi-Fi connection for remote control.
Configuring Ethernet settings, DHCP, static IP, ipconfig, and ping tools.
