EasyManua.ls Logo

Anritsu s332e Service Manual

Anritsu s332e
88 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Maintenance Manual
Site Master
Cable and Antenna Analyzer with
Spectrum Analyzer
S331E, 2 MHz to 4 GHz
S332E, 2 MHz to 4 GHz, Spectrum Analyzer, 9 kHz to 4 GHz
S361E, 2 MHz to 6 GHz
S362E, 2 MHz to 6 GHz, Spectrum Analyzer, 9 kHz to 6 GHz
Anritsu Company
490 Jarvis Drive
Morgan Hill, CA 95037-2809
USA
Part Number: 10580-00253
Revision: J
Published: May 2016
Copyright 2010, 2016 Anritsu Company

Table of Contents

Other manuals for Anritsu s332e

Question and Answer IconNeed help?

Do you have a question about the Anritsu s332e and is the answer not in the manual?

Anritsu s332e Specifications

General IconGeneral
BrandAnritsu
Models332e
CategoryMeasuring Instruments
LanguageEnglish

Summary

Safety Symbols

Spectrum Analyzer Verification

Frequency Accuracy Verification and Adjustment

Procedure to verify and adjust the CW frequency accuracy of the Spectrum Analyzer.

Single Side Band (SSB) Phase Noise Verification

Verifies the single side band (SSB) phase noise of the spectrum analyzer.

Spurious Response (Second Harmonic Distortion) Verification

Verifies the input related spurious response of the spectrum analyzer.

Resolution Bandwidth Accuracy Verification

Verifies the resolution bandwidth accuracy of the spectrum analyzer.

Spectrum Analyzer Absolute Amplitude Accuracy Verification

Verifies the absolute amplitude accuracy of the Spectrum Analyzer.

Residual Spurious Response Verification

Verifies the residual spurious response of the Spectrum Analyzer.

Displayed Average Noise Level (DANL)

Verifies the Displayed Average Noise Level (DANL) of the spectrum analyzer.

Third Order Intercept (TOI) Verification

Verifies the Third Order Intercept point (TOI or IP3) of the Spectrum Analyzer.

Cable and Antenna Analyzer Verification

Frequency Accuracy Verification

Verifies the CW frequency accuracy of the RF source in Cable and Antenna Analyzer mode.

Option Verification

Assembly Replacement

Troubleshooting

Turn-on Problems

Addresses issues related to the unit failing to boot up or complete the boot process.

Other Problems

Covers issues with touch screen, battery charging, lock errors, and specific option problems.

Related product manuals