6
Storage Receiver Test
(SAS-3/-4)
Receiver Jitter Tolerance Test
PCIe Gen3/4/5 Receiver Test
Base Specification
• Stressed Eye Test
CEM Specification
• Transmitter initial Tx Equalization
• Transmitter Link Equalization response
• Receiver Link Equalization
• PLL Bandwidth
USB Type-C Receiver Test
(USB4, Thunderbolt3, DP1.4)
Receiver Test
SJ Margin Test
Amplitude Margin Test
USB 3.2 Gen1/2 Receiver Test
Transmitter Eye Test
Receiver Jitter Tolerance Test
All-in-One
Test Support
MP1900A
Jitter Tolerance Test
SJ/RJ/BUJ Injection
Low-rate estimated BER measurement
General Interfaces
CEI-28G/56G/112G
InfiniBand
100G/400G/800G Ethernet
Fibre Channel
PCI Express
PCIe-Gen1, 2, 3, 4, 5
Storage Device
SAS-3/-4
USB3.2
、
4
USB Type-C
(Thunderbolt3 DP1.4)
USB
Target Applications
Next-Generation High-Speed Digital Interface Receiver Test
The growth of IoT and Cloud computing applications is driving the need for digital equipment with high-speed serial interfaces handling large data
volumes. To meet this need, the PCI Express (PCIe) and USB interfaces used by this digital equipment are transitioning to both next-generation PCIe
Gen5 supporting speeds up to 32 GT/s as well as to Type-C USB3.2 Gen2 supporting 10 Gbit/s and USB4 supporting 20 Gbit/s, which is also
compatible with Thunderbolt.
The MP1900A is a wideband BERT with a built-in Gbit/s-class PPG, ED, and Jitter/Noise addition functions as well as application software supporting
measurement of next-generation, high-speed digital-interface standards (CEI-28G/56G/112G, InfiniBand, 100G/400G/800G Ethernet, Fibre Channel,
Thunderbolt 3, PCIe, USB, SAS, DP) from development through to manufacturing.
Various Applications
Internal and external interfaces, such as Ethernet,
PCIe, and SAS, are supported along with USB3.2, 3.4,
and Thunderbolt via USB Type-C connectors and
cables, and Display Port.
MP1900A supports PCIe 3.0, 4.0 and 5.0 as well as
SAS using the same configuration.
Multi Interface
To Next Page
Loading...
