17
Application Examples
USB Type-C Receiver Test (USB4, Thunderbolt3)
Supports USB Type-C
Supports specified bit rates (USB4 20G, Thunderbolt3 20.625G)
Stressed Signal Calibration
Automation Software supports automatic stressed signal calibration as
specified by USB Type-C.
Required Functions
• 20 Gbit/s PPG
• Stressed Signal Calibration Function
• Jitter Tolerance Function
Stressed Signal Input Test
• Supports Rx BER measurements required by Host/Device compliance
test
• Supports automatic Rx test using Tenlira scripts
• Supports automatic Pass/Fail measurement for Rx stressed signal tests
Receiver Test
Calibration and the Jitter Tolerance test can both be automated using
the automation software. Automation helps cut design verification
times.
USB Cable
Micro Controller
DUT
JTAG
Header Cable
Receptacle
Fixture
ISI
Board
Remote Control
Automation Software
Test Report
To Next Page
Loading...
