Anritsu SQA-R MP1900A - High-speed Interconnect Evaluation

20
Application Examples
Multi-channel
Along with support for multi-channels, the bit rate of devices such as
back planes of high-performance servers is becoming increasingly
faster. The MP1900A supports generating both the Victim signal with
controlling Emphasis and the Aggressor signal for crosstalk testing
simultaneously. The MP1900A offers multi-channel measurements for
TRx devices such as Transceiver, SERDES and Clock Data Recovery (CDR).
Skew and Crosstalk Effect Check
Processing high speed digital signals requires both logic tests and
actual equipment tests. The MP1900A supports both pattern
synchronization and phase adjustment functions, permitting easy tests
of Rx device skew tolerance and crosstalk effects.
High-speed Interconnect Evaluation
Jitter Tolerance Test
Jitter Tolerance tests supporting various standards can be run by
simultaneously impressing SJ (2 tone), RJ, BUJ, and SSC up to
32.1 Gbit/s using the MX183000A-PL001 and MU185000B Jitter
modulation sources.
The Eye opening of signals passing through the back-plane is degraded
by loss in the board traces.
Required Test Items
• 32.1 Gbit/s Multi-channel signal generation
• Jitter Tolerance test
• Emphasis eciency check
• Crosstalk test
Differential
Data #1
PPG/ED
Synthesizer
Jitter Modulator
Emphasis
MP1900A
Aggressor Signal
High Speed Interconnect
Device/Back Plane
High Speed SERDES