31
Signal Quality Analyzer-R MP1900A Specifications
Refer to the MP1900A Data Sheet (MP1900A_Datasheet-E-A-1) for detailed specifications.
21G/32G bit/s SI PPG MU195020A
Operation Rate (NRZ) 2.4 Gbit/s to 21 Gbit/s or 32.1 Gbit/s
Number of Channels 1 or 2
Output Amplitude
0.1 Vp-p to 1.3 Vp-p (Single-end)
0.2 Vp-p to 2.6 Vp-p (Differential)
Emphasis 10Tap
Channel Emulator
Normal: Emulates Insertion Loss using S-parameter data
Inverse: Performs De-Emphasis compensation for S-parameter Insertion Loss
S-Parameter file: S2P,S4P
ISI
Emulates ISI output using CEI-28G/25G Nyquist frequency loss setting
Supports loss control in combination with ISI Board J1758A accessory
Insertion Loss setting: 1.5 to 25 dB, 0.01 dB step, Nyquist frequency
0 to 25 dB, 0.01 dB step, 1/2 Nyquist frequency
Tr/Tf (20 to 80%) 12 ps (typ.)
Random Jitter 115 fs rms (typ.)
PCIe, USB Link Training Supported (MX183000A-PL021/PL022/PL025)
Output Connector K (f)
21G/32G bit/s SI ED MU195040A
Operation Rate (NRZ) 2.4 Gbit/s to 21 Gbit/s or 32.1 Gbit/s
Number of Channels 1 or 2
Input Attitude
0.05 Vp-p to 1.0 Vp-p (Single-End)
0.1 Vp-p to 2.0 Vp-p (Differential)
Input Sensitivity (Eye Height)
15 mV (28.1 Gbit/s, NRZ)
30 mV/Eye (28.1 Gbaud, PRBS15, PAM4)
CTLE
Peak Frequency: 14, 8, 4 GHz
Gain: 0 to –12 dB
Clock Recovery Yes, supports SSC
PCIe, USB Link Training Supported (MX183000A-PL021/PL022/PL025)
Input Connector K (f)
PAM4 PPG MU196020A
Operation Rate (PAM4/NRZ) 2.4 Gbaud to 32.1/58.2/64.2 Gbaud (option selection)
No. of Channels 1
Output Amplitude
70 mVp-p to 800 mVp-p (Single-end)
140 mVp-p to 1600 mVp-p (Differential)
Offset –2 V to +3.3 V
Emphasis 4 Tap, –20 to +20 dB
Channel Emulator
Generates waveform with insertion loss and simulates waveform with corrected insertion loss
Set by loading S-Parameter file (S2 P, S4 P)
ISI
Simulates ISI generation waveform
Set using loss (–8.00 to 8.00 dB) at CEI-specified Nyquist frequency
Used in combination with channel board, such as J1800A/J1758A (optional accessories parts), or Noise Module MU195050A
Independently Variable PAM4
3 Eye
20 to 50% (PAM4 Amplitude 0/3 level = 100%)
PAM4 Pattern SSPRQ, PRBS13Q, PRBS31Q, RS-FEC, etc.
PAM4 Pattern Error Addition MSB Error, LSB Error, LSB&MSB Error, RS-FEC Symbol Error
Tr/Tf (20 to 80%) 8.5 ps (typ., NRZ)
Random Jitter 170 fs rms (typ., NRZ)
Output Connector V (f)
PAM4 ED MU196040B
Operation Rates (PAM4/NRZ) 2.4 Gbaud to either 32.1 Gbaud, or 58.2 Gbaud (PAM4)/64.2 Gbaud (NRZ) (option selection)
No. of Channels 1
Input Amplitude
NRZ: ≤32.1G: 0.05 Vp-p to 1.0 Vp-p, >32.1G: 0.1 Vp-p to 1.0 Vp-p
PAM4: ≤32.1G: 0.3 Vp-p to 1.0 Vp-p, >32.1G: 0.4 Vp-p to 1.0 Vp-p
Input Sensitivity (Eye Height)
NRZ: 19 mV @ 26.5625 Gbaud, 21 mV @ 53.125 Gbaud
PAM4: 23 mV @ 26.5625 Gbaud, 36 mV @ 53.125 Gbaud
Clock Recovery (Option) 2.4 Gbaud to 32.1 Gbaud, 51 Gbaud to 58.2 Gbaud
Equalizer (Option) Low-frequency Equalizer (≤1 GHz, 2 dB typ.) + DFE (1.4 dB typ.)
PAM4 Patterns SSPRQ, PRBS13Q, PRBS31Q, etc.
PAM4 Counter MSB, LSB, Symbol 0 to 3 (Option)
Input Connector V (f)
To Next Page
Loading...
