Anritsu MP1800A - Page 7

For Safety
vii
The laser in this equipment is classified as Class 1 according to the IEC
60825-1:2007 standard.
Table 1 Laser Safety Classifications Based on IEC 60825-1:2007
Model Name
Reco
mmende
d Module
Model Name
or Option
Model
Name/Part
Name
Class
Max. Optical
Output Power
(mW)
*1
Pulse Width
(s)/Rep
-etition
Rate
Emitted
Wave-
length (nm)
Beam
Diverg
ence
(deg)
Laser
Aperture
MU181600A
G0174A
850 nm XFP module
1 0.78 CW 840-860 36.9
Fig. 2,
[1]
G0175A
1310 nm XFP module
1 0.8 CW 1290-1330 11.5
Fig. 2,
[1]
G0176A
1550 nm XFP module
1 1.58 CW 1530-1565 11.5
Fig. 2,
[1]
MU181601A
G0177A
850 nm SFP module
1 0.56 CW 830-860 36.9
Fig. 3,
[1]
G0178A
1310 nm SFP module
1 1.0 CW 1270-1360 11.5
Fig. 3,
[1]
G0179A
1550 nm SFP module
1 1.0 CW 1430-1590 11.5
Fig. 3,
[1]
MU181620A
Optionx01
1310nm Reference
1 5.0 CW 1290-1330 11.5
Fig. 4,
[1]
Optionx02
1550nm Reference
1 5.0 CW 1530-1565 11.5
Fig. 4,
[1]
Optionx03
1310nm/1550nm
Reference
1 5.0 CW
1290-1330
or
1530-1565
＊
2
11.5
Fig. 4,
[1]
Optionx11
1310nm Stressed
Eye
1 5.0 CW 1290-1330 11.5
Fig. 4,
[1]
Optionx12
1550nm Stressed
Eye
1 5.0 CW 1530-1565 11.5
Fig. 4,
[1]
Optionx13
1310nm/1550nm
Stressed Eye
1 5.0 CW
1290-1330
or
1530-1565
＊2
11.5
Fig. 4,
[1]
*1: Indicates the possible optical output power when each and every
reasonably foreseeable single-fault condition is included.
*2: A light of either wavelength will be emitted.
Laser Safety