SYS
Pressing SYS on the data keypad in Transmission Measurement mode activates
a menu of system-related functions. Use the corresponding softkey to select the
system function.
q
Options — Displays a second level menu of options functions
q
Printer — Displays a menu of supported printers. Use the Up/Down arrow
key and the ENTER key to select the desired printer.
q
Change Date Format — Pressing this soft key changes the format of the
date as displayed in the message area. Choices are MM/DD/YYYY,
DD/MM/YYYY, or YYYY/MM/DD.
q
External Ref Freq — Allows an external reference frequency to be en
-
tered. Enter the desired reference frequency using the keypad or
Up/Down arrow key and press the ENTER key.
q
Bias Tee — If Option 10, Bias Tee (page 5-7), is installed, this key turns
the bias voltage on or off.
q
Back — Returns to the previous menu level.
q
Clock — Displays a second level menu of clock functions.
q
Hour — The hour is displayed in an edit box. Enter the desired hour
(0-23) using the keypad and press ENTER to accept.
q
Minute — The minute is displayed in an edit box. Enter the desired min-
ute (0-59) using the keypad or Up/Down arrow key and press ENTER to
accept.
q
Month — The month is displayed in an edit box. Enter the desired month
(1-12) using the keypad or Up/Down arrow key and press ENTER to ac-
cept.
q
Day — The day as displayed in an edit box. Enter the desired day (1-31)
using the keypad or Up/Down arrow key and press ENTER to accept.
q
Year — The year as displayed in an edit box. Enter the desired year
(2003-2038) using the keypad or Up/Down arrow key and press ENTER
to accept.
q
Back — Returns user to the top-level system menu.
q
Self Test — Starts an instrument self test featuring battery calibration, mem
-
ory, and local oscillator testing. Refer to the Self Test display on page 2-54.
Press the ESCAPE/CLEAR key to return to normal operation.
q
Status — Displays the current instrument status, including temperature and
battery charge states. Press ESCAPE to return to operation.
q
Language — Pressing this soft key immediately changes the language used to
display messages on the display. Choices are English, French, German, Span
-
ish, Chinese (simplified), and Japanese. The default language is English.
LIMIT
Pressing LIMIT on the data keypad in Transmission Measurement mode acti
-
vates a menu of limit-related functions. Use the corresponding softkey to select
the desired limit function. Then use the Up/Down arrow key to change its value,
which is displayed in the message area at the bottom of the display.
q
Single Limit — Sets a single limit value. Menu choices are:
q
On/Off — Turns the single limit function on or off.
Chapter 2 Functions and Operations
2-41
To Next Page