ANSI FRONTLINE RPA061S User Manual

Manual Revision Code: FRONTLINE-SRL-04 10-19-20
10
A. Heat Damage from Weld Spaer or Slag C. Broken Wires within Strands.
B. Bird Caged
D. Curled, Bent or Kinked
Incorrect Use of SRL
A. Damage due to heat – inside ber exposed C. Inside ber exposed due to cut
B. Separan of layers – stching was broken
D. Frayed top bers exposing core of webbing
Inspecn requirements for self-retracng devices
ANSI Z359.14-2014
CSA Z2592.2-17
Type of
use
Applican
examples
Example cns of
use
Worker
inspec
frequency
Competent
person
inspecn
frequency
Product
revalidan
frequency
Infrequent
to Light
Rescue and
cned
space, factory
maintenance
Good storage
condins, indoor or
infrequent outdoor
use, room
temperature, clean
environments.
Before each use
Annually
At least every 5
years but not more
than intervals
required by the
manufacturer.
Moderate
to Heavy
Transportan,
residen
construcn,
u
warehouse
Fair storage
condins, indoor and
extended outdoor use,
all temperatures, clean
or dusty
environments.
Before each use Semi-
annually to
annually
At least every 2
years but not more
than intervals
required by the
manufacturer.
Severe to
connuous
Commercial
construcn,
oil and gas,
mining,
foundry
Harsh storage
condins, prolonged
or connuous outdoor
use, all temperatures,
dirty environment.
Before each use
Quarterly
to semi-
annually
At least annually
but not more than
intervals required
by the
manufacturer.
Notes:
(1) Failure of a worker to perform [before each use] inspecn or failure of an inspecby a worker shall
D.
C.
B.
A.
Drawing 3.

ANSI FRONTLINE RPA061S Specifications

General

Brand	ANSI
Model	FRONTLINE RPA061S
Category	Safety Equipment
Language	English