EasyManua.ls Logo

ansio 1321 - Troubleshooting and Disposal; Troubleshooting Specific Problems

ansio 1321
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ANSIO 1321 (M20v01)
support@ansio.co.uk
11
The black switch to the
side of the heater is not
turned ON.
Check if the black switch to
the side of the heater is ON.
The heater
suddenly stops
working.
The room
temperature could
have exceeded the
set temperature;
hence the heater is
turned OFF
automatically.
Cool the heater down
completely before reuse.
Or
Raise the set temperature
above the room
temperature.
None of the Control
Buttons work.
Child Lock is ON
Press the Mode button
and the Timer button
together for a few seconds
to turn OFF the child lock.
FF flashing on the
display panel
The room
temperature is likely
to be more than 50
degrees.
Cool the heater down
completely before re-use.
WASTE DISPOSAL
You can help protect the environment! Please remember to respect
local recycling laws. Dispose of faulty or unwanted electrical
appliances in accordance with local policies and service centres.
This item must not be disposed of with household waste.
Please recycle where facilities exist. In the interests of health,
safety and the environment, please check with your Local Authority for recycling
advice
By ensuring that you dispose of your old electrical and electronic equipment
according to The European Directive 2012/19/EU on Waste Electrical and
Electronic Equipment (WEEE), you are helping to preserve our natural
resources.
For your nearest disposal facility, visit www.recycle-more.co.uk
Environmental Agency Registration Number for ANSIO: WEE/MM6674AA

Related product manuals