EN
95
INSTALLATION PROTOCOL
Model
Serial number inner section
Serial number outer section
OK
(X)
Not
conducted
(X)
Not conducted, cause
Leak test of cooling
circuit
Leak test of water
circuit
Bleeding of water
circuit
Function test
Set water temperature. °C
Set heating curve (1-15)
Set hot water temperature °C
Measured hot water temperature °C
Outside temperature °C
Hot gas temperature °C
Condensing pressure Bar
Current consumption Ampere
Reserve capacity connected (X)
Setting circulation pump
Min.
Med.
Max.
Installation/application (1-5)
Other (X)
The system has been installed in accordance with
Certicate no.
Company name
Installation date
Signature
To Next Page
Loading...
