Anslut 416121 User Manual

416121
Instrukcja obsługi
(Tłumaczenie oryginalnej instrukcji)
Ważny! Przed użyciem uważnie przeczytaj instrukcję obsługi!
Zachowaj ją naprzyszłość.
POWIETRZNOWODNA POMPA CIEPŁA
PL
Bruksanvisning i original
Viktigt! Läs bruksanvisningen noggrant innan användning!
Spara den för framtida behov.
LUFT
/
VATTENVÄRMEPUMP
SE
EN
AIR AND WATER HEAT PUMP
Operating instructions
(Translation of the original instructions)
Important! Read the user instructions carefully before use.
Save them for future reference.
NO
LUFTVANNVARMEPUMPE
Bruksanvisning
(Oversettelse av original bruksanvisning)
Viktig! Les bruksanvisningen nøye før bruk.
Ta vare på den for fremtidig bruk.

Anslut 416121 Specifications

General

Brand	Anslut
Model	416121
Category	Heat Pump
Language	English

Summary

Air and Water Heat Pump Operating Instructions

Operating Instructions

Provides essential guidance for the operation of the heat pump.

Guarantee Terms and Conditions

Installation Inspection Procedure

Installation Protocol Details

Installation Diagram Guide

Service Booklet Entries

Safety Instructions Overview

Electrical Safety Guidelines

Guidelines and precautions for electrical installation and safety.

General Safety Guidelines

General safety guidelines and important considerations for installation and use.

Product Description and Components

Installation Guidelines

General requirements and considerations for the installation process.

Operating Principles Explained

Electrical Connection Procedures

230 VAC, 50 Hz, 1-Phase Power Supply

Wiring instructions for a 230 VAC, 50 Hz, 1-phase power supply.

400 VAC, 50 Hz, 3-Phase Power Supply

Wiring instructions for a 400 VAC, 50 Hz, 3-phase power supply.

230 VAC, 50 Hz, 3-Phase Power Supply

Wiring instructions for a 230 VAC, 50 Hz, 3-phase power supply.

Using the Heat Pump

Before First Use Checks

Initial checks and procedures before operating the heat pump for the first time.

Heat Pump On/Off Control

Selecting Operating Modes

Heating Mode Settings

Details on setting the heat pump for heating operations.

Cooling Mode Settings

Details on setting the heat pump for cooling operations.

Hot Tap Water Mode Settings

Details on setting the heat pump for hot tap water generation.

Combined Mode Settings

Heating and Hot Tap Water Mode

How to configure for combined heating and hot tap water.

Cooling and Hot Tap Water Mode

How to configure for combined cooling and hot tap water.

Hot Tap Water and Auto Mode

Setting for hot tap water with automatic mode switching.

Parameter Settings and Curves

Service and Maintenance Procedures

Indoor Unit Maintenance

Maintenance procedures for the indoor unit.

Outdoor Unit Maintenance

Maintenance procedures for the outdoor unit.

Heat Exchanger Cleaning and Gas Refilling

Refrigerant Gas Refilling

Important points before refilling refrigerant by qualified personnel.

Troubleshooting Common Issues

Startup and Fan Issues

Troubleshooting steps for common issues with the heat pump and fan startup.

Performance and Capacity Issues

Addressing problems related to low heating output and overall system capacity.

Water Flow and Pump Problems

Compressor Pressure Issues

Defrost and Operational Problems

Resolving problems with defrosting cycles and the heat pump not running.

Error Codes and Explanations

Temperature Sensor Faults

Water Flow and Switch Faults

System Pressure and Protection Faults

Communication and Electronic Faults